RDL Network to Audio Interface

Description: Features: ?Converts Two Dante Network Audio Signals to Balanced AnalogSelectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHzEach Output Switch-Selectable for Mic or Line LevelNormal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB HeadroomMicrophone Output Level is Attenuated 50 dBEach Output is Protected Against Phantom Voltage up to 48 VdcSpecial Software Not Required for Module SetupExceptional Low-Noise and Low-Distortion PerformanceHigh Resolution 24 Bit Digital to Analog ConversionLegendary RDL Analog Filtering Enhances Superb Audio PerformanceLED Indicator for Valid Power and Network SyncOperation from PoE Power (Class 0, IEEE 802.3af) or external 24 VdcMounts on a Microphone Stand using an RDL SF-MSM1 The AV-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL2 is a professional grade product for studio quality fidelity and low noise performance. The AV-NL2 may be powered from an external 24 Vdc power supply, available separately. The AV-NL2 is equipped to operate from a PoE enabled network switch. The AV-NL2 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL2, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The AV-NL2 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Network Connector:RJ45 with Link and Speed indicators Digital Audio Ethernet Protocol:Dante Transmission Rate:100 Mbps Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz Bit Depth Supported:24 bits Audio Operating Level:-20 dBFS = +4 dBu Reference Level:0 dBFS = +24 dBu Outputs (2): XLR (male) Output Level (operating):+4 dBu nominal LINE level balanced; -45 dBu nominal MIC level (into 150 ?) Output Level (maximum):+24 dBu LINE level Output Impedance:< 100 ? balanced Selector per output:Mic/Line Frequency Response:20 Hz to 20 kHz (± 0.5 dB) THD+N:< 0.1% (20 Hz to 20 kHz,+4 dBu/-20 dBFS); 0.015% at 1 kHz (typ) Noise:< -75 dB (below +4 dBu); < -95 (below +24 dBu) Crosstalk:Below Noise Floor (1 kHz, output to output); < -60 d5 dB (20 kHz) Headroom above +4 dBu/-20 dBFS:20 dB Indicators (3): Ethernet Link and Speed (2, rear panel); Sync (front panel) Ambient Operating Environment:0° C to 50° C Power Requirement:PoE Class 0, IEEE 802.3af Specification Conditions:Gain/Level: ± 1 dB Dimensions:4.23" (10.74 cm) W; 1.68" (4.27 cm) H; 5.97" (15.16 cm) D Package Type:Cardboard Box Package Dimensions:7 x 4.375 x 2.25 in. Shipping Weight:1.39 lbs. WEEE weight:1.17 lbs. Tariff code:8543.70.9100

Price: 285 USD

Location: Milford, Iowa

End Time: 2025-01-26T21:33:30.000Z

Shipping Cost: N/A USD