Description: --> MERCEDESSPRINTER RESET Engine ECU / Engine ECU ECU HAS BEEN RESET AND IS READY FOR PROGRAMMINGpart numbers/part number0 281 014 200 A6461500277 Tested! Warranty! it`s REAL PHOTOA data with vehicle information being removed. It is ready for programming with a diagnostic device in another car.UK / FRANCE / ITALY / SPAIN - 3-4 working daysAvailable DHL Express For other countries please look at the list belowFeel free to ask in any languagea lot of satisfied customers - please look my feedbacksNO TAX - for trade buyers from EU-countries who have intra-UE VAT Identification Number Tested! warranty!The driver with the removed data from the vehicle used to disassemble it. It is prepared for programming using the appropriate diagnostic equipment in the other carGermany Austria - 2 working daysavailable DHL ExpressAsk in any languageMany satisfied customers - please see my feedbackNO TAX - for buyers from EU countries who have a VAT numberEach product needs to be programmed again Each and every product sold by us is carefully checked WarrantyInvoice includes 23% TAX - guarantee of legality Programming using a special device Before shipping, each product we sell is subject to the most careful technical inspection WarrantyThe invoice includes 23% VAT guarantee of legality Shipment Courier DPD / UPS with tracking Austria (2-3 working days)Belgium (2-3 working days)Czech Republic (2 working days)Denmark (3 working days)France (3 working days)Germany (2 working days)Hungary (2 working days)Italy (3-4 working days)Netherlands (3 working days)Hungary (2 working days)Spain (3-4 working days)Slovakia (2 working days)United Kingdom (1-4 working days)other countries UE - 2-8 days DHL / UPS EXPRESSDelivery usually takes one working day in UE Shipping Courier DPD / UPS with tracking Belgium (2-3 working days)Denmark (2 working days)Germany (2 working days)UK (1-4 working days)France (3 working days)Holland (3 working daysItaly (3-4 working days)Austria (2-3 working days)Slovakia (2 working days)Spain (4 working days)Czech Republic (2 working days)Hungary (2 working days)other countries UE - 2-8 days DHL / UPS EXPRESSDelivery usually takes one working day in UE We can also offer controllers programming of the variants mentioned above (PAID EXTRA) Any modifications to controllers depend on the make, model, type and technical condition of the module, in case of any doubts please contact us before buying in order to select the most appropriate option. We also offer programming of the control units in different variants (EXTRA PAID): Each introduction of a modification to your ECU depends on the brand, type, type and technical status of your module. If in doubt on your part, please contact us before purchasing to suggest the most suitable option. 1. Variant Clone of original ECU (Plug & Play) Data transfer from your original unit to our ECU). We will copy all data (VIN, mileage, IMMO, coding etc.) from your ECU to our. This item comes fully programmed with the same VIN as you have. To do this you will have to send us your old unit, then this unit will plug straight in and work with your existing keys.NO NEED TO CHANGE KEYS SIMPLY FIT OUR REPLACEMENT ECU AND DRIVE AWAY. YOU CAN FIT YOUR ECU ON YOUR OWN 2. Variant Plug & Play (VIRGIN - factory settings) After connecting an ECU to a car and switching on the ignition, the ECU learns automatically immo code, what allows to start the engine. NO NEED TO CHANGE KEYS SIMPLY FIT OUR REPLACEMENT ECU AND DRIVE AWAY. YOU CAN FIT YOUR ECU ON YOUR OWN 3. Variant CONTROLLER WITH IMMO CODE A foregoing immo code is read, thanks to that it is possible to introduce new data with a special device. 4. Variant IMMO OFF / Plug & Play Immo data will be removed to allow start the engine NO NEED TO CHANGE KEYS SIMPLY FIT OUR REPLACEMENT ECU AND DRIVE AWAY. YOU CAN FIT YOUR ECU ON YOUR OWN 5. Variant Reset via TECH2 A controller with vehicle information being removed. It is ready for programming with a diagnostic device in another car. 1. Variant The clone of the original (plug and play) data transfer from your original device to our ECU. We copy all data (VIN, mileage, IMMO, coding, etc.) from your ECU to our ECU. This item comes fully programmed with the same VIN as you. To do this, you need to send us your old device, then this device will be connected directly. NEITHER A KEY CHANGE NOR A WORKSHOP VISIT IS REQUIRED. IT IS ENOUGH TO CONNECT THE CONTROL UNIT AND ENJOY THE RIDE IN YOUR OWN GARAGE. 2. Variant Plug and Play (VIRGIN - Factory Reseten) AFTER CONNECTING THE CONTROL UNIT TO THE VEHICLE AND TURNING ON THE IGNITION, THE NEW IMMO CODE IS AUTOMATICALLY LEARNED WHICH ALLOWS THE ENGINE TO START. 3. Variant Control unit with the IMMO code THE PREVIOUS IMMO CODE IS RECOGNIZED BY THE CONTROL UNIT AND THANKS TO THE USE OF AN APPROPRIATE DEVICE, THE NEW DATA CAN BE ENTERED BY THE NEW VEHICLE 4. Variant IMMO OFF / Plug & Play Immo data is removed to start the engine. . Weither changing the keys nor a workshop visit is required. All you need to do is connect the control unit 5. Variant RESET via TECH2 THE CONTROL UNIT WITH THE DELETED DATA OF THE VEHICLE FROM WHICH IT WAS REMOVED; IS USED FOR NEW PROGRAMMING USING AN APPROPRIATE DIAGNOSTIC DEVICE IN ANOTHER VEHICLE. PREPARED. Regulations Each product needs to be programmed again with the help of advanced technical equipment? does not apply to plug & play auction nor immo off.We issue a VAT invoice. We give a guarantee within 30 days from the date of product reception. We determine the cost of variants individually for each product. If the warranty seal is broken we do not consider a complaint. You have 14 days for each product to be returned. All the products are originals and come from legal sources. If you are dissatisfied with an item please contact us before giving a negative comment. Regulation programming using a special device? this does not affect the auctions plug & play and immo off Each product requires a new The warranty period is 30 days from receipt of the product as per date The cost of the variant is determined individually for each item Complaints are excluded after removing the safety label Each product has a 14 day return policy All products are original and from a safe source If you are dissatisfied with the product and before leaving us negative feedback, please contact us first About us Our company has been dealing with automotive electronics since 2007. We are not only a seller of the parts but we also have an auto workshop. The auto workshop takes care of fixing and servicing automotive electronics. During all the time while we are on the market we have been trying to meet all the needs of our clients, due to that fact we have decided to start our online shop. We will do our best to fulfill all your needs, as well as our products and service will be of the high quality. About Us Our company operates the business associated with car electronics since 2007. We are not only seller of auto parts, but also auto repair shop, which normally deals with the repair and service of electronics in the engine. Throughout the period of restructuring of the company, we meet all the expectations of our customers, what leaves us on the operation of the online ?shop. We will make every effort imaginable to get our goods and services to the high level.
Price: 478.72 USD
Location: Czestochowa
End Time: 2025-01-27T01:52:56.000Z
Shipping Cost: 27.4 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Unbranded
Classic Car Part: No
Connector Type: Flat Plug
Installation Position: Front
MPN: 0 281 014 200
Manufacturer: Mercedes-Benz
Number of Ports: 2
OE/OEM Reference Number(s): Identical to manufacturer number
Programming Required: Yes
Reference Number: 0281014200, 0 281 014 200, A6461500277, A 646 150 02 77
Tuning & Styling Part: No
Type: Engine ECU
Universal Compatibility: No
Product Type: ECU
Manufacturer Part Number: 0 281 014 200