Rockford Fosgate Punch P300X2 100W x 2 Car Amplifier

Description: Product highlights2-channel car amplifier 100 watts RMS x 2 at 4 ohms (150 watts RMS x 2 at 2 ohms) 300 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode) CEA-2006 compliant Features: variable high- and low-pass filter filter (50-250 Hz, 12 dB/octave) variable PEQ2 bass/treble boost (0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz) C.L.E.A.N. gain setup system includes test tone CD test tones also available as MP3 download from Amazon On Demand, Rhapsody, Google Play, and Spotify, labeled "3sixty.3 setup disc" (Punch amps and the 3sixty.3 use the same test tone tracks for setup) Class-AB amplifier design frequency response: 20-20,000 Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp inputs and outputs speaker-level inputs ( speaker wire to RCA adapter required) signal-sensing turn-on with speaker-level inputs eliminate need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 8-gauge power and ground leads and an 50-amp fuse recommended wiring and hardware not included with amplifier no onboard fuses when installing multiple amps in a system, an additional 50-amp in-line fuse between the distribution block and the amplifier is recommended 9-15/16"W x 2-7/16"H x 8-13/16"D warranty: 1 year What's in the box2-Channel amplifier Four 1-3/8" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Setup/Manual disc About this itemWritten by Crutchfield's Buck Pomerantz Big power for your speakers or sub Rockford Fosgates Punch P300X2 amplifier sends 100 watts RMS per channel to your speakers, filling your ride with clean music. You can use the high-pass filter to keep the low bass out of your speakers so they perform more efficiently. You can also switch this versatile amp into mono mode to drive a subwoofer with up to 300 watts RMS, then use the built-in low-pass filter to send the correct bass frequencies to your sub. The Punch EQ2 features bass and treble boosts, in case you want to add a little boom or sizzle back into the mix. Easy to set for optimum performance P300X2 control panel Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. Its that simple — your amplifier is now set to match your receivers output. When your receiver reaches maximum clean volume, youll get maximum clean power from your Punch amp. At quiet listening levels, youll hear less background noise and more of your music. Keeps an eye on things while playing If that blue light turns solid red while youre playing music, the amps telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your musics clipping. The amps built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit wont hurt anything. Maintaining coolness raises efficiency and lowers distortion Rockford Fosgates Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. P300X2 connection panel and input clip light

Price: 249.99 USD

Location: Charlottesville, Virginia

End Time: 2024-09-24T00:35:07.000Z

Shipping Cost: 0 USD