RS485 to Ethernet Converter RJ45 it can be configured via webpage High Speed

Description: RS485 To Ethernet Converter, Easy-To-Use, High-Speed, Low-Power, High-Stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.FeaturesM0 series 32-bit ARM processor, fast speed, high efficiency10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cableConfigurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, SpaceAvailable working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own softwareSupports customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor dataSupports customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguishedSupports customized webpage, allows user to customize the module configuration pageSupports RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may changeKeepAlive mechanism, detects broken connection, auto re-connectingSupports time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot timeSupports DNS domain name resolution, configurable DNS serverSupports DHCP, auto-obtained IP or static IPFirmware is upgradable via the networkRestore to factory settings via software and/or hardwareComes with default MAC address, which is customizableProvided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port softwareExample code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.SpecificationsEthernet:Connector: 4-pin RJ45Communication rate: 10/100MbpsInterface protection: 1.5KV electromagnetic isolationProtocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD ClientTX cache: 6KbyteRX cache: 4KbyteRS485:Connector: screw terminal (A+, B-, GND)Data bit: 5bit, 6bit, 7bit, 8bitStop bit: 1, 2Parity bit: None, Odd, Even, Mark, SpaceBaudrate: 600bps~230.4KbpsRX cache: 800byteHardware flow control: noneInterface protection:2KV ESD protectionRS485 pull up/down registers: 2.2KΩPower:Power supply: 5.0~7.0V (5V recommended)Operating current: 150mA (@5V)Power consumption: <1WInterface protection: reverse-proof, ESD protection, anti-surgeEnvironment:Operating temperature: -25~75°CStorage temperature: -40~105°CDimensionsPACKAGE CONTENTWeight: 0.212 kgRS485 TO ETH x15V power adapter x1Selection GuideCOMPARISONUART TO ETHRS485 TO ETHRS232/485 TO ETHProcessorCortex-M0Cortex-M0Cortex-M4 (up to 120MHz frequency)EthernetRJ45 (10/100Mbps self-negotiation)Protocol: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client Cache: TX 6Kbyte, RX 4KbyteCache: TX 16Kbyte, RX 16KbyteSerialUARTRS485RS232+RS485 (allow to work at the same time)Baudrate: 600bps~460.8KbpsBaudrate: 600bps~230.4KbpsHardware flow: NOT supportedHardware flow: supportedData bit: 5, 6, 7, 8Stop bit: 1, 2Parity bit: None, Even, Odd, Space, MarkCache: RX 800byteCache: TX 2Kbyte, RX 2KbyteFraming condition: 4 byte time interval, or 400 byte in lengthFraming condition: 4 byte time interval, or customizable 0~1460 byte in lengthFeaturescustomized heartbeat packets, customized registration packets, customized webpage, RFC2217-like protocol, KeepAlive, timeout auto reboot, short connection, firmware upgrade via networkModbus is not supportedModbus gateway, Websocket (webpage to serial)Working ModesTCP Server, TCP Client, UDP Server, UDP Client, HTTPD ClientClient Counton TCP Server mode, customizable 1~16 Clientson TCP Server mode, supports 2-ch Socket, 8 Clients per chConfigurationBuilt-in webpage, Host computer config software, Serial commandsInterface ProtectionPower: reverse-proof, ESD protection, anti-surgeEthernet: 1.5KV electromagnetic isolation RS485: 2KV ESD protection, 2.2KΩ pull up/down registers　 lightning-proof, over-current protectionPower Supply3.3V/5V5~7V5~36VOperating Current150mA@5V110mA@5V86.5mA@5VTemperatureOperating Temperature: -25～75℃ Operating Temperature: -40～85℃ Storage Temperature: -40～105℃ Dimensions50.5mm × 22.6mm × 15mm70mm × 63.6mm × 25mm82.8mm × 85.7mm × 25mm WIKI: https://www.waveshare.com/wiki/RS485_TO_ETH

Price: 27.99 USD

Location: Clifton, New Jersey

End Time: 2024-08-20T02:52:54.000Z

Shipping Cost: 0 USD