Russound A2100 Half Rack 100w 2-Channel Digital Amp

Description: Product highlights100 watts per channel into 8 ohms (frequency bandwidth not given) at 0.1% THD with 2 channels driven 125 watts x 2 into 4 ohms 225 watts bridged into 8 ohms robust protection circuitry combines easily with other Russound 1/2-rack products selectable output impedance: 8-ohm, 4-ohm, or bridged 12v trigger input and output for automated turn-on signal-sensing input activates the amplifier when a source is detected 1 pair of analog stereo RCA inputs one pair of speaker connectors (supports up to 12-gauge wire) space-saving low-profile design total harmonic distortion: less than 0.1% into 8 ohms rack-mountable with included hardware detachable power cable 8-1/2"W x 10-1/2"D x 1-3/4"H weight: 4.1 lbs. warranty: 3 years What's in the boxDigital stereo amplifier 6' AC power cord 2 Short brackets Long bracket Mounting plate 4 Countersunk-head machine screws 6 Pan-head machine screws 4 Rubber feet Cord-lock clip Installation Manual About this itemWritten by Crutchfield's Kramer CranePowerful amp, small footprint I've been a fan of Russound's stereo amplifiers for years. They produce lots of power and are easy to use, and the A2100 is no exception. This compact workhorse delivers 100 watts per channel while only taking up half the space of a traditional rack-mounted amp. Install two side-by-side, or use the included full-width mounting ears for a clean single-amp install. Perfect for music in a second zone With plenty of power under the hood, the A2100 can be used in a variety of configurations. Drive your main speakers with it, or connect a pair of outdoor or kitchen speakers for easy sound in a second zone. Want to really jam? Bridge a pair of these amps to drive even the most power-hungry speakers with ease. A pair of RCA inputs support a pre-amp, receiver, or analog sources that have their own volume control. Multiple power-on options The A2100 can be turned on manually, or automatically when it detects a source. It's even 12-volt trigger compatible so you can have it turn on when another piece of equipment is fired up. A carefully designed chassis minimizes heat when installed in a rack. Never worry about blowing your speakers One of the features I like most about the A2100 is the ability to set maximum volume limits. On the back panel is a dial that lets you set a volume "ceiling." Even if an over-enthusiastic listener maxes out the system's volume, there won't be any damage to the speakers. This is a great way to make sure that guests or kids don't accidentally turn the system up to distortion levels.

Price: 399 USD

Location: Charlottesville, Virginia

End Time: 2023-12-02T19:10:07.000Z

Shipping Cost: 0 USD