Sea Hawk Cukote Teal Bottom Paint

Description: Other Sea Hawk Cukote Teal Bottom Paint Product SKU: S-H-3434GL Item Condition: New MSRP $276.49 Sale Price $220.99 Product Description: The Sea Hawk Cukote Bottom Paint has a high lode of cuprous oxide that makes this formula a top performer even in the most severe fouling areas. Due to its ablative and self polishing nature, there is no buildup of bottom paint over time. The underwater surface of your hull remains clean and smooth. The copolymer in Cukote can withstand removal from water without affecting its antifouling properties. Features: No TBT (organotin compounds) Semi-Hard, self-polishing ablative finish Removing boat from water does not affect antifouling properties Effective below the waterline on fiberglass, steel, and wood vessels 47.5% Cuprous oxide -------------------------------------------------------------------------------------------------- How to Apply Sea Hawk CUKOTE Bottom Paint Sea Hawk CUKOTE Bottom Paint is easily applied by brush, roller, or spray. When rolling, use only a high-quality short nap 3/8” roller cover. Apply using thin coats. For the smoothest possible finish, thin the paint approximately 10% using Sea Hawk 2031. CUKOTE has a tendency for settling to occur, especially if the paint has been on the shelf for several months. Thoroughly mix the paint before using. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. Finish: Semi-Gloss Coverage: 173 Sq Ft Application Method: Bursh, Rolling, Airless Sprayer Maximum Roller Thickness: 3/8” Nap Number of Coats: 2 Wet Film Thickness: 4.6 mils Dry Film Thickness: 2.5 mils Application Temp: 50° F Min/ 95° F Max Thinner: Sea Hawk 2031 Colors Available: 3445 Black , 3434 Teal , 3441 Red , 3442 Blue Previously Painted Surfaces Known Compatibility of existing antifoulant Power wash to remove any loose paint or other contaminants. Scuff sand with 80 grit sandpaper, remove all residue and let dry. Apply minimum 2 coats of CUKOTE. Allow 3-6 hours between coats and a minimum overnight dry. Unknown Compatibility of existing antifoulant Power wash to remove any loose paint or other contaminants. Scuff sand with 80 grit sandpaper, remove all residue and let dry. Apply 1 coat of 1277 Barrier coat primer or 1283 Island Primer Apply minimum of two coats of CUKOTE. Allow 3-6 hours between coats and a minimum overnight dry. Poor condition of existing antifoulant If previous coating is cracking, peeling, or flaking strip the antifoulant with stripper, sanding, or commercial blasting. Once stripped refer to the Bare Fiberglass Application Guidelines. Bare Fiberglass To prepare the surface it is important to remove all contaminants first. Scrub the surface with detergent soap and a stiff brush. Using either S-80 Wax N’ Grease Killer or S-90 De-Wax Etch & Cleaner scrub the surface and rinse thoroughly. Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner Once cleaned and sanded, seal the surface with 2-3 coats of Tuff Stuff. Apply the second coat once the first has a tacky feel. Apply minimum of two coats of CUKOTE. Allow 3-6 hours between coats and a minimum Sanding Method: Sand to a uniform dull looking surface with 80-100 grit sandpaper and rewash with S-80 Wax and Grease Killer or S-90 De-Watch Etch & Cleaner Apply minimum of two coats of CUKOTE. Allow 3-6 hours between coats and a minimum overnight dry. Non-Sanding Method: Apply one thin coat of Sea Hawk 1266 no more than .3-.5 mils wet film thickness and allow to dry for 1 hour. Apply minimum of two coats of CUKOTE. Allow 3-6 hours between coats and a minimum overnight dry. Bare Wood Clean the surface and ensure it is dry and free of contaminants. Sand to a uniformly frosty, dull looking surface with 80-100 grit sandpaper. Apply two coats of CUKOTE. Apply first coat thinned 20% and let dry overnight. Apply two more coats allowing 3-6 hours between coats and a minimum overnight dry. Steel/Aluminum Hulls Sandblast to near white or white metal SSPC-SP-10 or equivalent. Remove residue by brush or compressed air. Copper Based Antifoulant Application Apply two coats of S-76 Primer, the first coat applied within 1 hour of sanding. Allow the first coat to dry to a tacky feel then apply second coat. Seal the surface by using 3-4 coats of Tuff Stuff. Apply the first coat within 8 hours of applying the last coat of S-76. Apply minimum of two coats of CUKOTE, allow 3-6 hours between coats. Copper-Free Antifouling Application for Aluminum Only Seal the surface with 2 coats of Tuff Stuff. Apply the first coat and allow the surface to dry to a tacky finish. Apply minimum of two coats of CUKOTE, allow 3-6 hours between coats and a minimum overnight dry. Above information sourced from Sea Hawk Bottom Paint Application Instructions About UsWholesale Marine is an on line boating store founded to provide customers an easy way find top-quality products at the lowest prices. With associates who possess decades of combined boating experience, Wholesale Marine can truly provide expert customer service. Shipping MethodWholesale Marine currently ships all merchandise UPS or truck freight. All orders with in-stock items placed by 2:00 PM EST Monday - Friday are shipped that same day. Orders placed after 2:00 PM on Friday and orders place on Saturday and Sunday will ship on the following Monday. Orders that qualifying for free shipping may be shipped any method and carrier chosen by Wholesale Marine. Free shipping offers are only valid within the continental U.S. There are certain items that we cannot ship outside of the Continental United States. Items that cannot be shipped outside of the Continental United States include all name brand watersports products and hazardous materials, such as but not limited to paint, oil, resins and adhesives. *Canadian Customers: Please be aware that any brokerage, duty, or customs fees are out of our control. ReturnsWholesale Marine will gladly refund almost any merchandise within 30 days from original purchase date. To return just send merchandise prepaid, in its original unused condition. Please include a copy of original Wholesale Marine invoice. We will then refund the merchandise amount by the original payment method. Shipping costs are not refundable. No returns for special order items, electronics, cut lengths of material or hazardous materials, such as but not limited to paint, oil, resins and adhesives. Please ship all Returns to:Wholesale Marine147 Circle Freeway DriveCincinnati, OH 45246 Connect with UsFind us on: Powered by SixBit's eCommerce Solution

Price: 245.99 USD

Location: Cincinnati, Ohio

End Time: 2025-01-17T16:16:24.000Z

Shipping Cost: 0 USD