Description: Product Description Model 4400C-DRO 3.5″ x 17″ Lathe with Factory Installed Digital Readout (DRO) and standard accessories + the "C" Package. Upgrade Headstock Bearings to C5. The 4400C-DRO is the INCH Version Standard equipment for the model 4400C-DRO Lathe includes: A DRO display with power supply, and tachometer pickup decalA powerful 90V DC motor with electronic speed controller2.75″ (70mm) x 6.0″ (152mm) crosslide24″ (610mm) steel bed that has 17″ (431mm) between centersSpecial handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO lathes are outfitted with the special DRO 2″ (51mm) handwheels on the leadscrew and crosslide feed screw, and a 2″ (51mm) resettable “zero” handwheel on the tailstock. Each handwheel has laser engraved aluminum handwheel collarsRocker tool post substituted for the standard tool post used on the short-bed lathesPulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manualAvailable with red handwheels upon requestThe C Package Includes:3.1″ 3-jaw self-centering chuck3/8″ tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawboltSteady restLive CenterCompound SlideCutoff Tool and Holder3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring)5/32″ T-driver3-pc Center Drill SetSherline Accessories Shop Guide Book (224 pages, B/W)Thread Cutting AttachmentGeneral Specifications Swing Over Bed 3.50″ (90 mm) Swing Over Carriage 1.75″ (45 mm) Distance Between Centers 17.00″ (430 mm) Hole Through Spindle .405″ (10 mm) Spindle Nose Thread 3/4″-16 T.P.I. Spindle Nose Taper #1 Morse Spindle Runout of Morse Taper .0005″ or less Travel of Crosslide 4.25″ (110 mm) Tailstock Spindle Taper #0 Morse Protractor Graduations 0° to 45° by 5° Handwheel Graduations .001″ (.01 mm) Length Overall 32.5″ (826 mm) Width Overall 8.00″ (267 mm) Height Overall 8.00″ (216 mm) Shipping Weight 41 lb. (18.5 kg) Motor 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Spindle Speed Range 70-2800 RPM continuously variable by electronic speed control
Price: 1954.39 USD
Location: Vista, California
End Time: 2025-01-23T15:31:15.000Z
Shipping Cost: 75 USD
Product Images
Item Specifics
Restocking Fee: 10%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Sherline
Type: DRO- Digital readout display
