Description: For auction is a Skil Flexi-Charge System Power Pack 3.6V battery charger. Ideal for use with single-battery Skil Flexi-Charge tools such as models 2040, 2131, 2207, and 2211. Charger is new, not in retail packaging, and warranted non-DOA.FeaturesFor use with all Skil Flexi-Charge productsRecharges one battery in 3 hours (charger will not shut off - do not leave batteries in charger after 3 hours) LED charge indicator (will not shut off when battery full) Plugs directly into wall socket Flexi-Charge batteries are used with Skil cordless drills and screwdrivers models 2040, 2131. 2207, 2211, 2236, 2237, 2273, and 2425. Please note: this will NOT work with Skil 36BAT batteries. These are a different series of batteries incompatible with Flexi-Charge system. This charger is in excellent condition and warranted non-DOA. Read This Before Purchasing This Charger The charger you are replacing could have been burned out by a bad battery -- an internally shorted battery will overheat and melt down the wall transformer of this charger. A bad battery will melt down a new charger just as easily. Please follow the instructions at the bottom of this listing to test your battery before attempting to fully charge it. BATTERY TESTING INSTRUCTIONS w/ Voltmeter Battery Test, (by USER), with a VOLT-OHM Meter: Take a reading on your Battery in question in DC volts. Write down the reading. Place battery in A KNOWN GOOD CHARGER for 3 to 5 minutes. Take another reading on the battery, IF it is NOT up to the rated voltage of the battery, It IS INTERNALLY SHORTED, AND SHOULD NOT BE CHARGED FOR THE RECOMMENDED TIME. It will melt down a new charger. It needs to be replaced. EXAMPLE: A Bosch 18.0 volt battery reads 10.5. After 4 minutes of charging on a GOOD Charger, it now reads 11.6. THIS BATTERY IS BAD AND SHOULD BE REPLACED, AND IS OF NO FURTHER USE OF ANY KIND. (Will burn up any good charger.) The same type of battery, if after 4 minutes on charger, reads 18.0 volts. BATTERY IS GOOD TO USE. BATTERY TESTING INSTRUCTIONS w/o Voltmeter Take a known good or new 3 Hr. Charger such as the Skil 92370, 92490, 92590 or 92990 (1 Hr. Smart Chargers such as the Skil 92913, 92991 or 92910 can detect a bad battery and not try to charge it). Start charging the battery in question while at the same time monitoring the temperature of the battery and charger or charger transformer. If the battery or transformer is approaching a temperature that is too hot to touch remove it from the charger or power source as soon as possible. This battery is causing the charger to heat up too much and will damage the charger. Please dispose of this battery properly. Usually this will happen with the first couple of minutes but do monitor it carefully for the first charge cycle of each battery.. If the battery / charger gets warm but not hot the battery is OK and should fully charge in about 3 hours. Instructions provided by: Robert Bosch Tool Corporation, Houston, Texas. Dropped or otherwise abused your OmniBook? I stock the most commonly broken or lost OmniBook small parts, let me know if you don't find what you need in my other auctions. Check out my eBay feedback, I am a reputable eBay Seller.
Price: 34 USD
Location: Berkeley, California
End Time: 2024-12-19T08:47:38.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Battery Included: No
Brand: Skil
Maximum Number of Batteries Charged at Once: 1
Voltage: 3.6 V
