Description: Skil Flexi-Charge System Twin Power Pack Battery Charger Skil Flexi-Charge System Twin Power Pack Battery Charger For auction is a Skil Flexi-Charge Battery Charger for Flexi-Charge cordless drills and screwdrivers models 2072, 2073, 2131, 2207, 2211, 2236, 2237, 2273, sander model 2425 and flashlight model 2040. This item is new and unused. The unit consists of a charging base containing two sockets for Flex-Charge batteries, and a cradle for charging Skil screwdrivers with external charging contacts such as model 2207 and 2211. Cradle will also charge fixed-battery screwdriver model 2205. Permanently attached to the base is the power cord connecting to the AC wall transformer. Cord is wrappable around the back of the charger base, and there is a slot on the back to allow wall mounting. Includes charging LED. Read This Before Purchasing This Charger The charger you are replacing could have been burned out by a bad battery -- an battery pack with internally shorted cells will overheat and melt down the wall transformer of this charger. A bad battery will melt down a new charger just as easily. Please follow the instructions at the bottom of this listing to test your battery before attempting to fully charge it. FeaturesFor use with all Skil Flexi-Charge productsRecharges one or two batteries in 3 hoursContains Bit Storage for four screwdriver bitsLED indicates charging in process and that unit is functional Slot on back for wall mounting BATTERY TESTING INSTRUCTIONS w/ Voltmeter Battery Test, (by USER), with a VOLT-OHM Meter: Take a reading on your Battery in question in DC volts. Write down the reading. Place battery in A KNOWN GOOD CHARGER for 3 to 5 minutes. Take another reading on the battery, IF it is NOT up to the rated voltage of the battery, It IS INTERNALLY SHORTED, AND SHOULD NOT BE CHARGED FOR THE RECOMMENDED TIME. It will melt down a new charger. It needs to be replaced. EXAMPLE: A Bosch 18.0 volt battery reads 10.5. After 4 minutes of charging on a GOOD Charger, it now reads 11.6. THIS BATTERY IS BAD AND SHOULD BE REPLACED, AND IS OF NO FURTHER USE OF ANY KIND. (Will burn up any good charger.) The same type of battery, if after 4 minutes on charger, reads 18.0 volts. BATTERY IS GOOD TO USE. BATTERY TESTING INSTRUCTIONS w/o Voltmeter Take a known good or new 3 Hr. Charger such as the Skil 92370, 92490, 92590 or 92990 (1 Hr. Smart Chargers such as the Skil 92913, 92991 or 92910 can detect a bad battery and not try to charge it). Start charging the battery in question while at the same time monitoring the temperature of the battery and charger or charger transformer. If the battery or transformer is approaching a temperature that is too hot to touch remove it from the charger or power source as soon as possible. This battery is causing the charger to heat up too much and will damage the charger. Please dispose of this battery properly. Usually this will happen with the first couple of minutes but do monitor it carefully for the first charge cycle of each battery.. If the battery / charger gets warm but not hot the battery is OK and should fully charge in about 3 hours. Instructions provided by: Robert Bosch Tool Corporation, Houston, Texas. Dropped or otherwise abused your OmniBook? I stock the most commonly broken or lost OmniBook small parts, let me know if you don't find what you need in my other auctions. Check out my eBay feedback, I am a reputable eBay Seller. Packing and Shipping to USA is detailed below. 92942
Price: 48 USD
Location: Berkeley, California
End Time: 2024-03-05T20:13:33.000Z
Shipping Cost: 8.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Battery Included: No
Color: Black
Brand: SKIL
Maximum Number of Batteries Charged at Once: 2
Voltage: 3.6 V
