Description: Plastic 1/32 scale SRX 2019 Indy Car Body. 3D printed from PLA plastic. The body Fits Scalextric Start F1 racing car C4114 and C4113 chassis (Orange or Black F1 Cars). You will need to trim radiator intake down .2 inches on the chassis, line up the chassis and install screws. Body is made of PLA plastic and can be painted with acrylic, enamel, and plastic automotive paints. For best result, spray with Rust-Oleum primer - 2 in 1 filler & sandable and then sand with 400 or smooth grit paper. DesignWheel Base - 3.85 inchesBody Width - 2.5 inchesTotal Length - 6.25 inches Part included:1 Body1 Road Rear Wing1 Road Front Wing1 Oval Rear Wind1 Oval Front Wing4 wheel spacers (.1 in) Reminder: Scalextric Start F1 Racing Car NOT INCLUDED.32 Scale Indy Slot Car Assembly TipsRemove body from Scalextric Start F1 carSave 4 ScrewsRemove rear Wing from chassisTrim radiator intake on chassis by .25 inches located in front of middle mounting postsRemove wheel from chassis and install spacer at each wheelInstall body on chassis using the 4 screws and verify fitFinishing model tipsUse Super glue for wings and driver helmetUse X-Acto knife to remove any flashing and printer supportsUse multiple coats of Rust-oleum Filler-Primer and sand lightly with 600 grit paper 90 degrees from the layer lines. (fills the gaps between layer lines)Reinstall finished body on chassis using 4 screws
Price: 32.5 USD
Location: Holly Springs, North Carolina
End Time: 2024-09-01T19:02:45.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Model: SRX
Country/Region of Manufacture: United States
Non-Domestic Product: No
Type: Body
Year: 2019
Brand: 3D Slot Cars
