Speedway Grooving Tool Head Size 5, 9/32", Fits Ideal Tire Groover

Description: These heads are specially designed to fit the Tru-Hot Grooving Iron, Ideal Grooving Iron, and Econ-o-siper, Has an overall diameter of .38" and is available in several sizes to custom fit your need, Solid brass construction, Blades can be installed into head for grooving or siping tires, Five most common sizes available: #3, #4, #5, #6, and #8 Speedway Grooving Tool Head Size 5, 9/32" Fits Ideal Tire Groover Sku # 91082061-5 Mfr. Part # 91082061-5 Condition New Brand Speedway Motors Sold Each Details Info Solid brass construction for optimum thermal transfer Fits Speedway Motors and Ideal Heated Knives brand tire groovers Includes carbon steel blade supports with stainless steel retaining screw Blade size debossed into the tip of the head for easy identification Available in sizes #3, #4, #5, #6, and #8 Matching blades available in packs of 12 Tire Grooving Tool Heads for Most Common Grooving and Siping Jobs A heated tire groover is a great tool to have in a racer’s toolbox. Tire grooving and tire siping can be just the advantage you need for your race car’s tires to help you end up in the winner’s circle after a long night of racing on the dirt. Be sure and have the correct tool head and plenty of blades in your race car’s trailer at the ready trackside for grooving tires and siping tires. We carry a full lineup of cutting for these tire grooving iron heads too. Don’t forget you’ll want to install the head and set the blade to the depth of cut needed before plugging in the groover! Grooving Iron heads for grooving irons listed below. Item Details Size #s are measured in 1/16-inch increments. Charts (GIF) Installation Tips Install the head and set the blade to the depth of cut needed before plugging in the groover Plug the groover in and allow it to warm up for five minutes before you start grooving; our tabletop tire grooving is suggested for warm up and cool down Always store tool facing up/handle down in a vertical position while in use to minimize temperature transfer to the handle Monitor the temperature of the tool and unplug it as needed to regulate the temperature Tire Grooving Tips Sanding the mold nubs off the tread before grooving or siping is suggested if the nubs are large; a with a 60-grit sanding pad works well for this Most tires are easier to groove or sipe with the tire mounted and inflated to normal pressures; this is especially true with thin wall racing tires Complex tread designs can be marked out with a tire marking or Circle Track specific Grooving and Siping Tips Tire Grooving Grooves around the circumference of the tire will add side bite and help cool the tire Grooves across the tread will add forward bite and help warm up the tire Rear tire grooves and sipes across the tread typically work best when straight across the tread (90 degrees to the circumferential grooves) Front tire grooves and sipes across the tread typically work better at a slight angle and when viewed from the top of the right front tire the grooves will angle from right front to left rear Tire Siping Sipes have a similar effect as grooves and are primarily used to warm up the tire Sipes around the circumference do not provide much if any cooling effect since they are not open for air to flow through like grooves are 1/8-inch to 3/16-inch sipe depth works well for most tires. Adding more sipes which are closer together will increase the tire temperature and will add grip as long as the tire is not overheated If a tire is overheated and blisters the sipes need to be spaced further apart and possibly a shallower depth of cut should be used More sipes are typically used on front tires to help them heat up and less sipes on rear tires, especially the right rear Specs Sold in Quantity Each Overall Diameter .38 Width .28 MFG. Part # 91082061-5 Reviews Good product. Good price. Rated by Ace on October 26, 2020 Summary: Nice, well built grooving iron head. The Allen head screw is a nice update over the old ones. Yes, I recommend this product. Id recommend Rated by Trap on October 10, 2017 Summary: Grooving head works just as it should and great price Yes, I recommend this product. Works as designed. Rated by DJ20 on July 13, 2017 Summary: I use this to groove my Hoosier dirt tires. Works great. Yes, I recommend this product. great buy weekend racer Rated by racer89 on January 19, 2016 Summary: gives me wider groove well constructed and very well and professionally packaged Yes, I recommend this product. Groovy Rated by LMSS14 on July 29, 2015 Summary: Works great but make sure you let the iron and blade get nice and hot before using it. Cons: None Pros: Cuts easy Easy attachment Good Price / Value Yes, I recommend this product. Related Items / Suggested Parts Ideal 125 Grooving Iron Tool, Tire Groover, Siping, Siper Cutting Tire Grooving Head, Blade, and Siper Kit Grooving Tool Blades Size 5, 9/32" Fits Ideal Tire Groover 12 pk Mega Tire Grooving and Siper Kit Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 16.99 USD

Location: Lincoln, Nebraska

End Time: 2025-01-13T13:02:27.000Z

Shipping Cost: 12.99 USD