Description: This listing is for a resin 3D printed STY-2C Starslayer mech model, printed under license from Syllogy. Comes with a resin or plastic 30mm hex base, as supplies allow! Note: Video of Atlas model is for informative purposes only, to show quality of printed models. You will not receive this model. Sized to be compatible with CGL models, but may have slight discrepancies! All Pip'z Prints models are printed using name brand ABS-like resin for maximum strength. Models are shipped fully cured, and removed from supports. Some additional model work, such as filing or support nub removal may be necessary. All models provided unpainted, and colors of resin may vary. I do custom projects! Reach out to me at my store if you have custom models you would like printed, or need ideas for a lance/star/army! General Mech Chassis Lore: The Starslayer was intended to replace the Crab as the Star League's standard medium 'Mech after Cosara Weaponries were unable to meet the SLDF's required production volumes. Though Blue Shot's design won selection in 2765, the Starslayer would also be plagued with technical delays with its tracking system that would delay full production until 2772 and the Amaris Civil War. Despite the SLDF's desperate need for matériel, tensions between General Kerensky and Archon Robert Steiner II would result in Blue Shot delaying SLDF shipments until 2781 due to lack of "up-to-date" shipping information and as a result the Starslayer would be far more common in the LCAF service than the SLDF. By now a thoroughly Lyran Commonwealth design, production of the original 2C Starslayer would cease during the technological decline of the early Succession Wars, with Blue Shot Weaponry resuming with the superior and updated STY-3C model in wake of the Clan Invasion.[6][3] The Starslayer is built on a lightweight Thor-4 Endo Steel chassis and reaches a top speed of 86.4 km/h with its Magna 250 fusion engine. The Starslayer also has five Odin's Own Model 34z jump jets which give it the ability to jump up to one hundred and fifty meters. Finally, the design carries nine and a half tons of Norse-34 ferro-fibrous with CASE. The CASE protects the BattleMech from complete destruction in the event of an ammunition explosion.[6][3] Weapons and Equipment The primary weapons on the Starslayer are a pair of BlazeFire Systems Large Lasers that provide the 'Mech with a striking distance of up to four hundred and fifty meters. For close range combat, the Starslayer has two Defiance B3M medium lasers and a Defiance B4M small laser. Finally, to allow the Starslayer to find and exploit weak points in an enemy's armor, it also carries a TharHes 4 Pack SRM-4 launcher.[6][3] The FireScan T&T system of the 3C and 3D is imported from Richvale. Normally used on LRM and SRM Carriers, the system seemed incompatible with laser weaponry until computer add-ons fixed the issue.[1] Chassis specific: STY-2C The original Starslayer, introduced in 2772, used a standard chassis and only mounted seven tons of ferro-fibrous armor, carrying an array of lasers developed in-house by Blueshot including Blueshot large lasers, Razzing Devil medium lasers and a Blueshot Standard small laser. Only the Moonshot missile rack had to be licensed for manufacture.[7] BV (1.0) = 1,180;[8] BV (2.0) = 1,365.[9] Since the STY-3C was only introduced in 3056, earlier references to the STY-3C should be read to mean STY-2C instead; see Notes.
Price: 6.5 USD
Location: Kissimmee, Florida
End Time: 2025-02-03T03:52:21.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Syllogy
Country/Region of Manufacture: United States
