Techniweld AGCLAIRVOYANT3.0GOLD Armour Guard Crystal Clear Blue View 2" x 4 1/4"

Description: Techniweld AGCLAIRVOYANT3.0GOLD Armour Guard Crystal Clear Blue View 2" x 4 1/4" Multi Shade Auto-Darkening Filter Lens. Version 3.0. (Gold Plated)Stainless steel case reflects infrared heat/light and stays cool!Fits in all 2" x 4 1/4" welding helmets, 1/1/1/2 Optical quality according to EN379Clear State: Shade 3; Dark State: Shade 5 (for cutting), darkest at shade 8-13 for weldingImproved solar and lithium battery, designed for faster switching times between shadesAmbient light awareness design for "flicker-free" TIG weldingAll digital, new & improved software for reduced flickeringUltralight and ultrathin, this lens has one of the world's fastest dim switching speeds at 1/16000th of a secondCartridge size: 4.25" x 2" x .193"; Viewing area: 3.8" x 1.38"Features: Our new gold welding lenses are engineered to redirect theintense heat generated during welding, enhancing the comfort ofwelders during their work.Gold Lens coating reflects 90% of the infrared radiation whichwould otherwise reach a welder's eyes. This not only reduces the risk of eye strain but also contributes to overall eye comfort.Fits in all 2" x 4 1/4" welding helmets, 1/1/1/2 Optical quality according to EN379Clear State: Shade 3; Dark State: Shade 5 (for cutting), darkest at shade 8-13 for weldingImproved solar and lithium battery, designed for faster switching times between shadesAmbient light awareness design for "flicker-free" TIG weldingAll digital, with a much thinner design than the AGCLAIRVOYANTUltralight and ultrathin, this lens has one of the world's fastest dim switching speeds at 1/16000th of a second7 level delay time, ranging from .06-1 second7 level sensitivityTechnical Specifications:Cartridge Size: 4.25" x 2" x 0.193"Viewing Area: 3.80” x 1.38"Power Supply: Solar and CR1025 Lithium batterySensors: 2 independent sensorsSwitch time: Time required to switch between shades: 0.06msPackaging: Individually packaged, pack of 10Shade: Clear state: Shade 3Dark state: Shades 5 for cutting, 8-13 for weldingGrind: YesTIG capability: 2ABattery: Highest quality of lithium CR927Applications: Designed for use with welding, heating, or cutting/gougingManufacturing– Architectural and Structural Metals, Mining, Agricultural, Motor Vehicles, Aerospace, Shipbuilding, and PipelinesConstruction – Residential, Commercial, Bridges, Dams, Utilities or any other industry where welders may workAuto-Darkening applies change from light state to dark state when welding starts and will automatically return to light state when the arc stopsUsage Instructions: Before welding Check the front & back polycarbonate lenses are securely in place to protect against impact, spatter, and scratchingAdjust headband so that the helmet is seated on the head as low as possible and near to your face. Adjust helmet angle when in the lowered position by turning headgear Ensure helmet shell/frame does not obstruct solar panels or sensors, doing this may cause eye injury while weldingCheck the correct operation of the filterAdditional Instructions Do not use or open the auto-darkening filter if damaged by shock, vibration or pressure. Keep the sensors and solar cell clean. Clean the filter cartridge using a soapy water solution and soft cloth which should be damp but not saturated. Do not leave lowered in position; a bright light surface could cause the filter to darken unexpectedly. Do not use solvents or abrasive cleaning detergent. If cover lens is spattered or covered with dirt, it should be replaced immediately. Do not use the helmet without inside and outside cover lenses properly installed. Contact Us: Discount Welds LLC 2745 NW 21st St, Miami, Florida 33142, United States

Price: 130 USD

Location: Miami, Florida

End Time: 2025-01-18T12:05:48.000Z

Shipping Cost: 0 USD