This is a Danger HIGH Voltage sticker or vinyl cut decal, glossy yellow.

Description: This is a Danger HIGH Voltage sticker or vinyl cut decal, glossy yellow.The actual measurements of the sticker are approximately 5.5 X 6.25 in. The sticker is glossy yellow, all the black shown is what is c-thru, and the white is the background, so this would look best on a black background. These sticker designs are brought courtesy of Cut Ready Clipart, or my own personal designs, or a little of both. I cut the decals myself from Oracle 651 vinyl, which is of intermediate grade quality; it will last quite awhile outdoors and very long indoors. Please check out the specs from Oracle’s site for specifics on the material. These stickers are cut a certain way so that itis very important touse application tape for applying the sticker. I will send one piece ofapplication tape that will fit the sticker. Please read or watch a tutorial online to learn how to apply a vinyl sticker. I will apply the application tape for you so it will come on top of the sticker and looks like masking tape. You can use soap and water to apply it, forinstance on a window, or for regular dry application. If thepieces are verysmall in the design please take some tack off of theapplication tape byapplying it to something lint free remove and reapply acouple times. Good luckand thank you. Please read or watch a tutorial online to learn how to apply a vinyl sticker in addition to reading this it may help to see someone do it, if it is your first time. I also included step by step instructions below. Also, the application tape included can be used for wet or dry application. You can usesoap and water to apply it, for instance on a window, or for regular dry application. If the pieces are very small in the design please take some tack off of the application tape by applying it to something lint free remove and reapply a couple times. If you have any questions please send me a question. Also, I have a degree in graphic design so if you have any questions or for a custom design I can help. And, if you are looking for a different size, or color, of a specific design I will do my best to post one like it. Good luck and thank you. Equipment Needed A credit card or a vinylsqueegee, and application tape. How to apply sticker: The idea is the tape applied to the top of the sticker will hold everything in place while you safely pull off the backing of the sticker. If you need anything specific with a sticker, custom sizes or designs, colors, let me know. Thanks again. Email me if you have any questions about applying the sticker or using the included application tape. Paulie4000 Steps: 1. Apply pressure over the whole sticker top(the application tape side of sticker) with the credit card or squeegee. Flip over. the application tape will be on the bottome and the stickers backing on top. 2. Pull off the backing of the sticker. This is the waxy piece( not the masking tape colored application tape) of paper underneath your sticker. Be careful after you pull off the backing, the sticker will stick to anything like crazy. 3. Line up sticker properly; place one side down, then slowly credit or squeegee from left toright until the whole sticker is down. Go over the whole sticker pushing out any air bubbles or parts that are not all the way down. 4. Carefully and slowly pull off application tape making sure all sticker parts are staying on the medium you are applying the sticker to. If something not sticking (which is rare, usually only for real small pieces) go back and reapply with squeegee or credit card directly on part not sticking and then try again, repeat until stuck down. 5. Go over the whole sticker lightly with squeegee or credit card. For wet application 1.Spray the surface that you want the sticker to be approximately, with soap and water. 2. Place sticker over the sprayed area and slide around until in correct spot, do this quickly, it will start to stick. Once the sticker is where you want it… 3. With squeegee, or credit card, start pushing and pulling the water out from under the sticker with the edge of the card or squeegee, keep doing this tell no bubbles and almost all the water is out. 4. Carefully pull application tape off, making sure it isn’t taking off any of the sticker. 5. Wipe down with soft cloth and let dry. Congratulations on applying your sticker! If you need anything specific with a sticker, custom sizes or designs, colors, let me know. Thanks again. Email me if you have any questions about applying the sticker or using the included application tape. Paulie4000

Price: 3.39 USD

Location: La Mesa, California

End Time: 2024-09-11T14:18:16.000Z

Shipping Cost: 0 USD