Throttle, Prop, Mixture, Trim, Flaps Controller for Flight Sims

Description: You can see FSELITE's Review of these controllers here. https://www.youtube.com/watch?v=cTEkomEMlKc&ab_channel=FSElite I make these Cessna Style Throttle - Mixture - Prop - Flaps - Trim controller for flight sims. It is usb and no drivers are needed. Just calibrate in Windows Control Panel, bind controls in game and ready to fly. I 3D printed the case/knobs and internal components. It is using brand name (Bourns) linear slides and potentiometer. The throttle, prop and mixture are push-pull only controls. The flap lever is 3 position momentary switch, push up to raise flaps one notch at a time, push down to lower flaps one notch at a time, the switch auto returns to center. The trim wheel is geared down to allow for minor elevator adjustments with approximately 4 complete rotations to go from -100 to 100% trim adjustment in game. It is well built and I guarantee from any defects for 1 year. If you have any issues contact me and I will happily resolve them! The controller works perfectly in Microsoft Flight Simulator 2020 and X-Plane and should work in any other flight sim/game. Includes 6' USB cable, just plug it in and Windows or MacOS will recognize it without drivers. Four versions available - One with a desktop clamp, for those that do not plan to permanently mount the controller it can now easily be mounted or removed in seconds - One with no desktop clamp that has M5 nuts in the lid and base to allow for permanent mounting either on top or under your desktop/cockpit. For under mounting please allow about 2.75" overhang for clearance of the trim wheel section. - Dimensions for these two version are 12" x "5.75 x 1.9", Trim section is 4" tall. - One that is TPM (Throttle, Prop, Mixture) push/pull controls permanent mount version with M5 nuts in the lid and base. Dimensions for this model are 7" x "5.75 x 1.9". - One that is TPM (Throttle, Prop, Mixture) push/pull controls version with Removable Desktop Mount. Dimensions for this model are 7" x "5.75 x 1.9". Directions on how to configure the controller in Microsoft Flight Simulator 2020 can be found here: https://flightsimstuff.com/pages/microsoft-flight-simulator-2020-controller-setup If you have any issues with the controller please contact me, I will go above and beyond to resolve any issues that may occur. Thank you!

Price: 119 USD

Location: Coopersville, Michigan

End Time: 2024-07-24T10:48:06.000Z

Shipping Cost: 0 USD