Description: Untitled DocumentView StoreFeedbackTick Performance Street Heat Stage 3 POLLUTER Cam Kit for LS1/LS6 - Camaro/Corvette Tick Performance proudly offers their Elite Series of Camshafts designed specifically for LS1 & LS6 Engines! Using the latest and greatest technology available, they've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Their Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity. Tick Performance Street Heat Stage 3 "POLLUTER V2" Camshaft for LS1 & LS6 Engines239/244 | .635”/.610” | LSA112+3 This Tick Performance Elite Series Camshaft Package for LS1 & LS6 Engines includes the following:Tick Performance Street Heat Stage 3 POLLUTER Camshaft (SH003).660" Lift Dual Valve Spring Kit w/ Steel Retainers7.400" Chromoly One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16) Designed for: LS1, LS6, LQ4 and LQ9 Engines (325-364ci) with Cathedral Port Heads (as they're equipped with stock)Basic Operating RPM Range: 3000-7000Expected Horsepower Gains: 50-70RWHP over the stock camshaft in a well-optimized setupAftermarket Headers Required: Yes, Longtube StyleStall Converter Required: Yes, 4000+RPMRear Gear Upgrade Required: Suggested for maximum performance (4.10+ for manual transmissions, 3.73+ for automatics)Works Well with Nitrous: Yes (shot size less than 250)Will Pass Most Smog Emissions: No For years, the Polluter V1 was Tick Performance's flagship camshaft, known and respected industry-wide as a maximum effort heavy-hitter that absolutely LOVES nitrous. Their brand new Street Heat Stage 3 "POLLUTER V2" Camshaft for LS1 & LS6 Engines successfully carries on the Polluter name and mixes it with the newest, most advanced technology available! The result? HUGE power gains, impressive valvetrain longevity and surprisingly good street manners (with a good dynotune, of course.) This camshaft (like all of their Elite Series Camshafts) is designed to fit stock engine/cylinder head combinations without the need to clearance your pistons, but since it is a TIGHT fit, we require that you verify piston-to-valve clearance during install. Countless hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available. Don't see the size pushrod you need? These are available in anything from 7.000" through 11.550" long in 0.025" increments. Contact us for details! 7.400" is the standard LS length, but any of the following can affect pushrod length required and each application may be different. Cylinder Head Deck ThicknessBlock Deck HeightValve Stem LengthRocker Arm BrandCam Shaft Base Circle DiameterLifter Design, Etc. We highly recommend that you measure you particular application to determine correct pushrod length due to the number of variables involved. We cannot recommend a length based strictly on combination and the only way to determine required length is to measure appropriately. NOTE: This camshaft utilizes a 3-bolt timing gear pattern. NOTE: The valve spring kit included is designed for stock style valve guides ONLY. The valve spring kit will not work with aftermarket bronze valve guides. Please contact prior to purchase if another spring kit is needed for your application. RETURNSPlease read the listing entirely as returns are typically not accepted and may be subject to a 20% restocking fee. If you have any questions or are unsure of something, please ask before purchasing. Cancellations will not be made for purchasing errors. It is the buyer's responsibility to make sure that they enter the correct shipping information at the time of purchase. Once an item has shipped, we can not make edits to the shipment, including the shipping address provided.SHIPPINGMost items ship in 1-2 business days. Shipping is available for customers outside of the Contiguous United States, please contact us for the best and most accurate rate quote.PAYMENTS LEGALAll images and text contained within this listing are protected by intellectual property copyright law and are intended for the sole use of Glenn's Auto Performance. Our Terms of Service Agreement and Privacy Policy are available for your review by clicking the hyperlink.
Price: 719.99 USD
Location: Mount Airy, North Carolina
End Time: 2025-01-11T16:44:14.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Tick Performance
Interchange Part Number: Camshaft
California Prop 65 Warning: WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number). Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.
Manufacturer Part Number: TPESCPLS16
Other Part Number: SH003