Tofu60 Redux Case fit Wooting 60 HE (Without Brass weight bar)

Description: The Tofu60 Redux case doesn't come with the internal Brass weight bar by default. All cases shown in pictures are with internal weight bar installed which are for reference only. There is no brass weight bar, if you only purchase the case on this page. Specs Case: Anodized Aluminum, E-coating Aluminum or Acrylic Weight bar: Brass, surface sandblasted process Structure: Tray-mount Compatible with most 60% PCB, including DZ60 rev3.0/DZ60 RGB-ANSI/DZ60RGB V2/GH60/Wooting 60HE PCB, etc. As seen in our video in the photo gallery! Weight: Aluminum case approximately 0.8 kg (non-brass weight bar) / Acrylic case approximately 0.4 kg (non-brass weight bar) approximately 1.08 kg (with brass weight bar) Typing angle: 7 degree Comparison with Tofu60 1.0 Sandblasted brass weight is added internal, the weight is increased Replace the round rubber feet with long strip rubber feet Two detachable golden stand-offs located in the middle and bottom of the case interior To tackle the issue with USB port placement, the USB port has been redesigned. It is now a movable sider to accommodate Standard GH60 PCB's and Wooting 60 HE's port alignment. Its functionality allows for USB port to aligned correctly for fit various implementations. Include: Price $59 of the case only includes the following items: Case (with USB blocker) x1 Foam pads x1 set Long strip rubber feet x1 set Bottom foam x1 Screws x1 set Optional accessories Click here to buy the brass weight bar: Brass weight bar x1 (+$25 USD) Disclaimer 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help. -For anything built is not eligible for Return & Refund. Click for more Dimension

Price: 121.05 USD

Location: China

End Time: 2025-02-02T06:42:57.000Z

Shipping Cost: 0 USD