TonePros LPS02 US Standard TP6 T1ZS Bridge Tailpiece Set US Nashville 4mm

Description: Tone Pros LPS02 USA Nashville 4mm Tune-o-matic Bridge & Tailpiece Set TP6 USA Small Post Locking Bridge + T1ZS US Thread Locking Tailpiece These sets pair a Tone Pros TP6 locking tune-o-matic bridge with a T1ZS Locking tailpiece. The items are new as pictured, include bridge, tailpiece, bridge posts and tailpiece studs with spare bushings for builders - no need to replace your existing bushings for either the bridge or tailpiece. This set is for Gibsons or other US guitars with small (4mm) bridge posts - the Nashville tune-o-matic. The saddles are unnotched. The tailpiece studs are brass, US threads, 3 1/4" post spacing and will also drop right in to your Gibson or other US thread setup. Here are the bridge specs: Post Thread: 5mm Metric (as used by Gibson on Nashville Models)Post to Post Spacing: 2.93 inches/ 74.5mmSaddle Notch: Un-Notched SaddlesSaddle Material: ZmacBridge Material: ZmacPost/Thumbwheel Material: BrassRadius: 12 inchPost Top Width: .15 Inches/ 4mm This bridge ups the ante on the Gibson's Nashville Bridge concept. It is a direct replacement, requiring no modifications to install. The body of the bridge locks to the posts via two small set screws on the sides of the bridge. The results are pretty dramatic. No buzzing, no rattling. The bridge is coupled perfectly to the posts, it won't move even with the strings off. This results in increased sustain and harmonics, better intonation, better tone. The tailpiece seals the deal by locking the tailpiece to the posts via two small set screws on the sides of the tailpiece. This design is their best, the tailpiece height is very easy to adjust prior to locking. These sets ship either on a single factory blister pack or on two seperate blister packs (one for the bridge and one for the tailpiece). The parts/models/specs/price are identical, regardless.

Price: 93.95 USD

Location: Burlington, North Carolina

End Time: 2024-12-01T22:13:06.000Z

Shipping Cost: N/A USD