UBERTI BIRDSHEAD 2P BLACK IVORY SCROLL GRIPS ~ Cimarron Cattleman, Stallion, etc

Description: Arizona Custom Grips UBERTI BIRDSHEAD 1873 SINGLE ACTION ARMY STYLE REVOLVERS ~ Cattleman Birdshead, Stallion Birdshead, Doc Holliday Birdshead, Bonney 1873 Cattleman Birdshead, Kenda Leseigne Birdshead, Short Stroke CMS Pro Birdshead, etc. ~ ~ See below for details ~ ~ Exclusive ~ MAGNA-TUSK™ Black ivory GRIPSwith scroll engraving Milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details. The Uberti Birdshead is the ideal concealable revolver for today’s Western enthusiast. The Bird’s Head grip design has been incorporated into Uberti’s Cattleman series of 1873 Single Action Army revolvers in both standard and Stallion designs. They are available in various barrel lengths and calibers. The Bird’s Head grip was originally designed for Colt Derringers in the 1850s. In 1877, Colt incorporated the distinctive and comfortable grip style into full-frame revolvers called Bird’s Head Colts. ~~~~~ two-PIECE (with SCREWHOLE) STYLE THIS AUCTION IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW. ******** ONE-PIECE VS. TWO-PIECE STYLE GRIPS: A Choice for Every User! Two-Piece style grips incorporate a visible screw and screwhole, allowing easy and quick removal for cleaning or maintenance of your revolver. One-piece style grips do not use a screw but instead use an internal spacer. Both styles are traditional and historical designs and both were originally used on early Colts, so it is a matter of personal preference. Both styles of our grips will interchange and work on either style of grip frame. See below. One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer (included with the grips) between the grip panels, as seen on many of the early Colts. The spacer is sent unmounted to ensure optimum fit with your revolver, with simple, quick installation which takes about one minute or so per grip. Fully illustrated instructions are included. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look. One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Alternatively, our Two-Piece style grips (i.e., grips with a visible screw and screwhole) offer the superior convenience of quick grip removal. They include a free Conversion kit, allowing their use on revolvers that are currently using one-piece style grips that do not have a grip pin. The conversion kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors. Fully illustrated, detailed instructions are included with each set of grips. 01042300 ~~~~~ WHAT THESE WILL FIT (Please read this through in its entirety): These grips WILL FIT the UBERTI BIRDSHEAD 1873 Single Action Army style revolvers. These grips will fit all Uberti Birdshead revolvers, whether imported through Cimarron, Taylor’s & Co., Navy Arms, Stoeger, etc. If it is made by Uberti, these will fit. Please see the important note below. *PLEASE NOTE – IMPORTANT!!: If your Birdshead revolver is a “Doc Holliday” 1873 Cattleman birdshead, a “Uberti Bonney” 1873 Cattleman birdshead, a “Kenda Leseigne (CMS Pro) birdshead”, a “Cattleman Stallion” birdshead, or a “Uberti Short Stroke CMS Pro” birdshead, please let us know via email immediately after the purchase, as these have special grip requirements. WHAT THESE WILL NOT FIT: this auction is for a Birdshead style grip, which has a smooth curve on the backstrap, and will NOT fit the somewhat similar Thunderer style revolvers (also made by Uberti and marketed by Cimarron), which have a hump on the backstrap. Please take a look at the pictures carefully to note the difference. If you have a Thunderer style grip, please visit our store or check our other auctions to find the correct grip. Or you can also click “Uberti” under our Store Categories section at the left of this page. Please send us an email and tell us your specific model if you cannot locate what you need, or if you have any questions. We are always happy to help. 02182300 A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction. For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 9212200Arizona Custom GripsAbout Magna-Tusk™ Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material. Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 08292000Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. While we make every effort to render the pictures as close to the actual product as possible, there may be slight variations in the hue of the product due to monitor settings, camera lighting, etc.Grip screw included with all grips.Custom satisfaction is important to us. Full money back, less shipping, if not completely satisfied.Thank you!!

Price: 99.95 USD

Location: Mesa, Arizona

End Time: 2024-02-18T18:41:05.000Z

Shipping Cost: 5.99 USD