UBERTI SAA ADI JOHN WAYNE MAGNA-TUSK™ GRIPS ~ Cattleman, Evil Roy, El Patron etc

Description: Arizona Custom GripsUBERTI SAA(SINGLE ACTION ARMY REVOLVERS)~ Exclusive ~ MAGNA-TUSK™john wayne fingergrooveAged distressed ivory GRIPS~~~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full instructions with illustrations are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000 WHAT THESE WILL FIT (Please read this through in its entirety):These Grips WILL FIT: ANY of the standard sized UBERTI 1873 Single Action Army “plowhandle” style revolvers. Uberti’s standard sized grips will measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. These will be marked “Uberti,” and may also (but not necessarily) be marked by the U.S. importer, such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, or “EMF”, etc. Besides fitting any standard Uberti SAA style revolver as mentioned above, these grips will fit (and are properly milled, fitted, and specked) for any of the following:Cimarron / Uberti Cattleman, 1873 Cattleman II, Cimarron Model P, Evil Roy, El Patron, Hombre*, American Arms Regulator*, Cimarron New Sheriff, Uberti US 7th Cavalry, U.S.V. Artillery, and Cavalry Scout, Pistoleer, Holy Smoker, Wyatt Earp Buntline, Rooster Shooter, Chisholm, Cody, Desperado, Frisco, Old West, Stallion, Buntline, Horseman, SASS Pro, CMS Pro, E.M.F. Dakota II* or Dakota III*; Also: Taylor’s & Co. Smoke Wagon, Cattleman, Gambler, Cattleman 12-Shot, Runnin’ Iron, Taylor Marshall, Drifter, Devil Anse, Old Randall*, and Ranch Hand*;Also: Any of Stoeger’s Uberti revolvers, or any Uberti SAA style revolver with the standard sized grip frame, or Uberti revolver from any other importer, even without a specific name or designation. If you have a standard SAA style revolver marked Uberti, these will fit.*PLEASE NOTE: if you have a BRASS gripframe (such as found on the Hombre, the Regulator, the Dakota II or III, Old Randall, or Ranch Hand revolvers), you MUST contact us prior to ordering and let us know what you have, as these grips may require additional specifications, profiling, and machining cuts. What these WILL NOT FIT: 1. Please note that these grips are made to fit ONLY the Uberti Model 1873 style Single Action revolvers, with the typical “plowhandle” shaped gripframe, and will NOT fit other makes of revolvers (such as Pietta, Armi San Marco, Colt, Ruger, etc.). These grips will also NOT fit the Bisley, the Birdshead, the Thunderer or the Lightning style revolvers, from ANY maker, which use a completely different shaped grip frame. Please email if you have any questions.2. In addition, these WILL NOT FIT grip frames which are around 3-3/8” tall. To make sure you are ordering the correct grip, please check your grip frame measurement prior to ordering. Your grips or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. The important thing is to make sure they are NOT around 3-3/8” tall. Taylor & Co.’s Gunfighter, Cimarron Bad Boy, the El Patron Grizzly Paw, and the Uberti Callahan, for example, have the taller 3-3/8” grip frame. If you have one of these, any of our Uberti 1860 Army Conversion & Metallic Cartridge revolver grips are milled to work for these, as well as the Conversions. Please send us an email and tell us your specific model if you cannot locate what you need, or if you have any questions. We are always happy to help.A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 11132000 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, an exclusive of Arizona Custom Grips, are manufactured out of our super high-grade, ultra-high density material developed exclusively for our premium grip production. Vastly superior to standard bonded ivory or stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural and synthetic compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: Unlike the lightweight artificial yellow plastic materials sometimes offered for sale, Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk Ivory. Grip blanks are then milled from this premium material, incorporating both CNC techniques for blanking and finishing techniques similar to those used in manufacturing the originals. They are then carefully aged with our exclusive aging process, incorporating concentrated UV light (the essential aging property in natural sunlight). Our process produces an authentic appearance and genuine patina which extends into the surface, just like real ivory or stag. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. Accept no substitutes. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their custom-stocked revolvers to the range or club, where the quality difference is immediately seen and appreciated by fellow shooters. Magna-Tusk grips have all the authenticity of the originals, with several improvements over original materials including increased durability, and are made to last a lifetime. They feature subtle but authentic color mottling, grain variegation, and other authentic minute details found on original old Ivory and aged Stag, as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 030120 Grip screw included with all grips. The photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!

Price: 109.95 USD

Location: Mesa, Arizona

End Time: 2023-10-04T15:51:01.000Z

Shipping Cost: 5.99 USD