Description: Upgraded Ultrasonic GDI Fuel Injector Cleaner Tester 6-Cylinder Cleaning MachineDeacription:MRCARTOOL V310 GDI Injector Cleaner & Tester: a desk 6-cylinder injector cleaner and tester. It not only can be used to clean and test the standard injectors, of note that it can carry out GDI injectors, including compatible for Benz, BMW, AUDI, Porsche. It comes with multi voltages available for GDI injectors, which enables to adapt for different types of injector testing.Main Functions: 1. Uniformity / Sprayability test: to detect the uniformity of the fuel injection quantity of each injector and monitor the spray status of injectors thoroughly and carefully by using the backlight, and to backflush injectors. 2. Leakage test: to test the leakage and dribbling conditions of injectors under system pressure. 3. Injecting flow test: to detect the amount of fuel injected normally by injectors in 15 seconds. 4. Auto. test: under specific working conditions and parameters, the precise simulation of test of injectors under various working conditions 5. Ultrasonic cleaning: to perform ultrasonic cleaning on multiple injectors at the same time, removing carbon deposits on injectors completely. 6. On-Vehicle Cleaning: Coming with a variety of disassembly-free cleaning connectors, the device can be used to perform on-vehicle cleaning and maintenance for various vehicle models. 7. Language selection: the system supports multiple languages and users can choose the appropriate language according to their needs. 8. Version information: to check the software version information of the current device. Main Features: [For GDI Injector Cleaning&Test]: MRCARTOOL V310 injector cleaner can clean and test not only standard injectors but also GDI injectors, such as for Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines. [Multi Voltage Selection]: MRCARTOOL V310 GDI Fuel Injector 6-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing. [Upgrade Ultrasonic Cleaning]: Different from other cleaner& tester machines, MRCARTOOL V310 comes with a cooling fan and thermal protection, and with a power of 60w, its ultrasonic cleaning capacity is significantly enhanced. [Various Parts equipped & Portable Drawer ]: It is equipped with a variety of injector accessories for different needs. A portable drawer at the bottom is designed to store a variety of parts and for easy access. [6-Cylinder & 2 Draining Ports Design]: MRCARTOOL V310 can test and clean 6 injectors at the same time for better efficiency; it also has both control valves for cleaning solution draining and test liquid recovery. Very easy and convenient to deal with and no worries about leaving a mess. Specifications: Working Environment: Working environment ● Power supply: AC110V / 220V±10% ● Frequency: 50-60HZ±0.5 ● Relative humidity: <85% ● Ambient temperature: 0℃~+40℃ ● External magnetic field strength: <400A/m ● No open flames are allowed around Technical parameter ● Fuel tank capacity: 2000 ml ● Test tube amount: 140 ml ● RPM range: 0~7500 r/min ● Time range: 0~9900 times ● PWM pulse width: 0~20.0 ms ● System pressure: 0~0.6Mpa (adjustable) ● Timing: 0~10 minutes adjustable ● Ultrasonic cleaning power: 70W (intermittent work) ● Ultrasonic cleaning frequency: 50KHZ±0.5 KHZ ● Dimensions: 380mm (length) × 405mm (width) × 335mm (height) ● Weight: 16.6KG Solutions to Common Problems 1. No response on startup Check if the fuse at the bottom right side of the machine is damaged. If it is damaged, please change it. 2. Fuel leak at coupling element of fuel distributor Fuel leaked at coupling element of fuel distributor. Please check whether the “O” ring installed matches and if it deformed or damaged. If it does not match or is damaged, please change it. The two adjusting screws should not be too tight, which may also cause the coupling element of fuel distributor to leak fuel. 3. Test solution in the transparent tubes can be drained completely by pressing [Drain] button twice. The solenoid valve of the machine has a 60-second automatic shutoff function; Multiple drainages may be required if there is a large amount of test solution in the transparent tube. Package List:1* V310 GDI Fuel Injector Cleaner&Tester 6* Taper adapter φ10.5-13.6φ 6* BMW special adapters 1* Special nozzle pad 5* Plugs for oil rail 1* Ultrasonic bath cover 6* 16mm adapters 6* Nozzle pads 1* Oil rail 6* Adapter cables 1* Power cable 4* Fixed screws for oil rail 4* Fixed nuts for oil rail 1* Ultrasonic cleaning bracket 1* Filling funnel 1* Outlet valve 6* 11mm adapters 6* 12mm adapters 6* 12.5mm adapters 6* 13mm adapters 6* 14mm adapters 6* 15mm adapters 1* User manual with warranty card
Price: 699 USD
Location: Bordentown, New Jersey
End Time: 2023-11-08T06:42:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: China
Supported System: GDI Fuel Injector Cleaning
Clean Power: 70W
Vehicle Type: ATV, Motorcycle, Passenger Vehicle
OBD Interface: CAN, EOBD, OBD, OBDII
Manufacturer Part Number: Does Not Apply
Brand: MRCARTOOL
Warranty: 2 Year
Type: Injector Tester
Range of Rotation: 0~7500rpm (step length: 10rpm)
Time limit: 1~10min
Pulse Width Range: 0~20ms (step length: 0.1ms)
Environment Temperature: 0℃~40℃
Relative Humidity: 85%
Strength of External Magnetic Field: 400A/m
Operating Volume: 2000ml
Main Unit Dimensions: 333*325*325mm
Function 1: Ultrasonic cleaning
Function 2: Uniformity / Sprayability test
Function 3: Leakage test
Function 4: Injecting flow test