Used YAMAHA SG-800S '82 Tobacco Sunburst 4.1kg Electric Guitar

Description: Description YAMAHA SG-800S '82 Tobacco Sunburst The "SG" series is an original Yamaha model that appeared in the 1960s. It started with the SG-2/3 around 1966 and the "Blue Jeans Custom" SG-5/7 of the same year, and reached the double cutaway shape with the SG-30/35 around 1973. The traditional SG shape that continues to this day was completed with the SG-175 in the following year, 1974, and has been produced almost uninterruptedly as Yamaha's signature model since then. The "SG-800S" made in 1982 is in stock this time, and is a relatively clean one. [Body] Total weight about 4.2kg. The body material is maple top/mahogany back. It has a chic tobacco sunburst color, and although there is a cloudiness that is typical of Yamaha at this time, it has kept a relatively clean color. There are signs of use such as dents on the body top and head top, buckle scratches on the body back, dullness on the metal parts, cracks on the pickup ring, and sticker marks on the pickguard/back panel. [Neck] The neck is made of mahogany with a rosewood fingerboard and a set neck joint. This is a minor change model from the SG-800, but it uses dot inlays instead of arrow inlays. There are small dents on the back of the neck near the 3rd and 4th frets, and it is slightly catchy. The frets and nut are not worn out, but the playability is good. The nut width is about 43.2mm. It features a slim neck shape that is typical of the Yamaha SG. [Electrical system] The controls are the orthodox [2 volume/2 tone/3-way pickup selector switch], and the tone pot is equipped with a push/push type bi-sound system (coil tap), which is a familiar specification. The powerful and straight tone is the base, and the combination with the bi-sound makes it attractive for its depth that covers even sharp single coil sounds. Accessories: Soft case Weight: 4.1kg Body Material (Top/Back): Maple/Mahogany Neck Material: Mahogany/Maple/Mahogany 3-piece Fingerboard: Ebony Nut Width: 43.0mm Fret Width: 2.8mm Neck Thickness (1F/7F/12F): 21.1mm/23.8mm/25.5mm Pickup (Neck/Bridge): YAMAHA Semi Open Humbucker (7.6kΩ/7.6kΩ) *The DC resistance of the pickup is measured through the control section. Payment Please pay within 4 days after purchase. Shipping Please refer to Shipping and handling.About other area, please ask me. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. * Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Price: 1018.68 USD

Location: Jpan

End Time: 2025-01-16T02:33:02.000Z

Shipping Cost: 0 USD