Description: Bluetooth 4.0DescriptionThevLinker is an OBD to UART interpreter IC designed to provide bi-directional half-duplexcommunication with the vehicle’s On-Board Diagnostic system (OBD-II). It supports all legislated OBD-II protocols, as well as two proprietary networks:forGM Single Wire CAN (forGMLAN), andforFord Medium Speed CAN (MS CAN).A wealth of information can be obtained by tapping into the OBD bus, including the status of the malfunction indicator light (MIL), diagnostic trouble codes (DTCs), inspection and maintenance (I/M) information, freeze frames, VIN, hundreds of real-time parameters, and more.The V_ Link01 is fully compatible with the de facto industry standard ELM327 command set. Based on a 32-bit processor core, the V_ Link01 offers more features and better performance than any other ELM327 compatible IC.Feature■Rich instruction set, compatible with more APP software.Fully compatible with ELM's AT command set;Fully compatible with STN's ST command set; Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN; 39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.■Multiple protocols15 ELM format protocols; 23 STN format protocols; Up to 64 user-defined protocols.■ Multiple fieldbusSAE J1850 VPW SAE J1850 PWM ISO 9141-2 ISO 14230-4 ISO 15765-4 CAN SAE J1939 CAN ISO 11898 (raw CAN) For GMLAN Single Wire CAN (forGMW3089)For Ford Medium Speed CAN (MS CAN)■ Multiple power management solutions Compatible with ELM and STN power management solutions. Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep; Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode. Device sleep power consumption is less than 2 mA.■ OBD request byte up to 48 bytes, can meet the needs of some special long frameCommunication. ■ UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps. ■ User-operated storage area 256-byte storage unit More than 100,000 erasable times Read and write operations on any unit in the storage area by using the VT command ■ Mix ID Sending" mode of CAN protocol. Optional formatted send data according to protocol ■ Multiple WM sequence settings Support AT command to manually set WM sequence Support for specifying a protocol or a full protocol-wide temporary WM sequence Support for a permanent link between a protocol and a private WM sequence ■ Secure bootloader for easy firmware updates Typical Applications Vehicle telematics Fleet management and tracking applications Usage-based insurance (UBI) OBD data loggers Automotive diagnostic scan tools and code readers Digital dashboards Bluetooth 4.0DescriptionThevLinker is an OBD to UART interpreter IC designed to provide bi-directional half-duplexcommunication with the vehicle’s On-Board Diagnostic system (OBD-II). It supports all legislated OBD-II protocols, as well as two proprietary networks:forGM Single Wire CAN (forGMLAN), andforFord Medium Speed CAN (MS CAN).A wealth of information can be obtained by tapping into the OBD bus, including the status of the malfunction indicator light (MIL), diagnostic trouble codes (DTCs), inspection and maintenance (I/M) information, freeze frames, VIN, hundreds of real-time parameters, and more.The V_ Link01 is fully compatible with the de facto industry standard ELM327 command set. Based on a 32-bit processor core, the V_ Link01 offers more features and better performance than any other ELM327 compatible IC.Feature■Rich instruction set, compatible with more APP software. Fully compatible with ELM's AT command set; Fully compatible with STN's ST command set; Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN;39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.■Multiple protocols15 ELM format protocols; 23 STN format protocols; Up to 64 user-defined protocols. ■ Multiple fieldbusSAE J1850 VPW SAE J1850 PWM ISO 9141-2 ISO 14230-4 ISO 15765-4 CAN SAE J1939 CANISO 11898 (raw CAN)For GMLAN Single Wire CAN (forGMW3089) For Ford Medium Speed CAN (MS CAN) ■ Multiple power management solutions Compatible with ELM and STN power management solutions. Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep; Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode. Device sleep power consumption is less than 2 mA. ■ OBD request byte up to 48 bytes, can meet the needs of some special long frame Communication. ■ UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps. ■ User-operated storage area 256-byte storage unit More than 100,000 erasable times Read and write operations on any unit in the storage area by using the VT command ■ Mix ID Sending" mode of CAN protocol Optional formatted send data according to protocol ■ Multiple WM sequence settings Support AT command to manually set WM sequence Support for specifying a protocol or a full protocol-wide temporary WM sequence Support for a permanent link between a protocol and a private WM sequence■ Secure bootloader for easy firmware updatesTypical ApplicationsVehicle telematicsFleet management and tracking applications Usage-based insurance (UBI) OBD data loggers Automotive diagnostic scan tools and code readers Digital dashboards WIFIDescriptionThevLinker is an OBD to UART interpreter IC designed to provide bi-directional half-duplexcommunication with the vehicle’s On-Board Diagnostic system (OBD-II). It supports all legislated OBD-II protocols, as well as two proprietary networks:forGM Single Wire CAN (forGMLAN), andforFord Medium Speed CAN (MS CAN).A wealth of information can be obtained by tapping into the OBD bus, including the status of the malfunction indicator light (MIL), diagnostic trouble codes (DTCs), inspection and maintenance (I/M) information, freeze frames, VIN, hundreds of real-time parameters, and more.The V_ Link01 is fully compatible with the de facto industry standard ELM327 command set. Based on a 32-bit processor core, the V_ Link01 offers more features and better performance than any other ELM327 compatible IC.Feature■Rich instruction set, compatible with more APP software.Fully compatible with ELM's AT command set; Fully compatible with STN's ST command set; Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN; 39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps. ■Multiple protocols 15 ELM format protocols; 23 STN format protocols; Up to 64 user-defined protocols.■ Multiple fieldbus.SAE J1850 VPW SAE J1850 PWM ISO 9141-2 ISO 14230-4 ISO 15765-4 CAN SAE J1939 CAN ISO 11898 (raw CAN) For GMLAN Single Wire CAN (forGMW3089) For Ford Medium Speed CAN (MS CAN)■ Multiple power management solutions Compatible with ELM and STN power management solutions.Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep; Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode. Device sleep power consumption is less than 2 mA.■ OBD request byte up to 48 bytes, can meet the needs of some special long frameCommunication.■ UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.■ User-operated storage area256-byte storage unit More than 100,000 erasable times Read and write operations on any unit in the storage area by using the VT command ■ Mix ID Sending" mode of CAN protocol.Optional formatted send data according to protocol■ Multiple WM sequence settings Support AT command to manually set WM sequence Support for specifying a protocol or a full protocol-wide temporary WM sequence Support for a permanent link between a protocol and a private WM sequence■ Secure bootloader for easy firmware updatesTypical Applications Vehicle telematics Fleet management and tracking applications Usage-based insurance (UBI) OBD data loggers Automotive diagnostic scan tools and code readers Digital dashboards
Price: 139 AUD
Location: Colebee, New South Wales
End Time: 2024-12-12T12:58:32.000Z
Shipping Cost: 7.1 AUD
Product Images
Item Specifics
Restocking fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Manufacturer Part Number: Does Not Apply
OBD Interface: OBD
Brand: Does not apply
Connectivity: WiFi
