Description: The Vilros Raspberry Pi Pico kit inspired by the Get Started with Micro Python on Raspberry Pi Pico book.This kit includes everything you need to immerse yourself in the world of Raspberry Pi Pico.This kit provides the all parts you need to build the projects in the official Get Started with Micro Python on Raspberry Pi Pico book,The Book is book sold separately.You can also use the parts create your own using projects with the dozens of components that are included (see below part list below).Parts & Components1 × Presoldered Raspberry Pi Pico with male headers attached1 × Full Size Solderless breadboard800 HoleSticky Back1 x Battery Holder and Breadboard PanelHolds the Breadboard and Battery Holder in place for an easy and neat wiring experience. 30 × Jumper wires10pcs male-to-female (M2F),10pcs male-to-male (M2M)10pcs female-to-female (F2F).12 × Colorful LEDs:3x red, 3x blue,3x yellow and 3x green.3 AA Battery Holder with Micro USB ConnectorPower the Pico on the GO 1x Neoprene Parts Storage Case with PocketInternal Dimensions: 10x7 inchesDouble ZipperBlack NeoprenePocket for accessories storageLoop Handle1 × USB Type-A to Micro Type-B 2.0 Cable5-Pin28/28AWG1 × 3 Pin header.Can be used on the SWD Pads if desired. (The SWD pads are NOT used Get Started with Micro Python on Raspberry Pi Pico book and not used in most projects)5 × Push-button switches.10 × 330 Ω resistors.1 × Active piezoelectric buzzer.2 × 10 kΩ potentiometer.1 × HC-SR501 PIR sensor.1 × I2C 1602 LCD module.1 × WS2812B LED strip.1 × Clear hard plastic box for small part storageRaspberry Pi Pico Pinout Guide----------------------------------------------------------------------------------------------Raspberry Pi Pico Specs:21 mm × 51 mm form factorRP2040 microcontroller chip designed by Raspberry Pi in the UKDual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz264KB on-chip SRAM2MB on-board QSPI Flash26 multifunction GPIO pins, including 3 analogue inputs2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels1 × USB 1.1 controller and PHY, with host and device support8 × Programmable I/O (PIO) state machines for custom peripheral supportSupported input power 1.8–5.5V DCOperating temperature -20°C to +85°CCastellated module allows soldering direct to carrier boardsDrag-and-drop programming using mass storage over USBLow-power sleep and dormant modesAccurate on-chip clockTemperature sensorAccelerated integer and floating-point libraries on-chip
Price: 39.99 USD
Location: Lakewood, New Jersey
End Time: 2024-08-10T18:30:07.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: Vilros Raspberry Pi Pico
MPN: VRPPHK004
Brand: Vilros
