Vintage Hargrave / Cincinnati Tool Co. (CTC) C-Clamps

Description: SGS- Blacksmith, Forestry, Gardening, & Machine Shop Tools ... where we try and group our listings of related tools. Our $20.00 shipping cost only applies for the first eligible item selected. All additional eligible items ship free (see the following instructions). To take advantage of our $20 flat rate shipping option, click the Add to Cart button (not the Buy it Now button) for all of our eligible items on our SGS-Blacksmith Tools site you wish to purchase. When you checkout, your cart will only list a shipping cost of $20.00 for all of our eligible items you have selected for purchase from our SGS-Blacksmith Tools site. Note: Not all of our listed items qualify. To verify that one of our items is eligible for this free shipping rule, look for these instructions in the description, and verify that $20.00 is listed as the shipping charge. Also, items on our other ebay sites may be combined to qualify for our $20.00 flat rate shipping fee as well (please see instructions at the bottom of this description area). Vintage Cincinnati Tool Co. (CTC) C-Clamps (select one)Also Hargrave - Made in USA The following are my observations and comments, but please reference the pictures and ask questions to make your own assessment. Unless noted otherwise (or delineated in the picture), all of these vintage Adjustable Brand C-Clamps are in functional condition, and the movable jaw essentially centers on the fixed jaw (this is not always apparent, as the fixed jaw casting is not always symmetrical). In addition to any item specific information listed below, please review the photos of the individual item/s of interest to determine the condition of your selection. Our p/n 3892: Please note the welding splatter, and that the fixed pad is not level. Our p/n 4314-2: The screw shaft is approximately 1/8" off center diagonally forward, and the handle is not straight. Our p/n 4532-1: The screw shaft is approximately 1/16" off center, and does not close tight. Our p/n 4532-2: The screw shaft is slightly bent, and does not close tight. Our p/n 4532-3: The screw shaft is bent, and does not close tight. Our p/n 4532-4: The screw shaft is slightly bent. Our p/n 4532-6: The screw shaft is approximately 1/16" off center diagonally, and does not close tight. Our p/n 4532-7: Please note that the thumb grip is slightly bent. Our p/n 5042: The screw shaft is approximately 1/8" off center diagonally. Our p/n 6797: Please note that the handle is bent. Our p/n 6798: Please note that the handle is slightly bent, and the screw shaft is approximately 1/16" off center. Our p/n 7076: Please note that the handle is not straight. Our p/n 7077: The screw shaft is approximately 3/16" off center diagonally forward. Our p/n 7078: The screw shaft is approximately 1/4" off center. Our p/n 7079: Although it can be aligned, the screw shaft appears to be approximately 1/8" off center. Our p/n 7574: Please note that the handle is slightly bent. Our p/n 8182: Please note the weld debris on the body. Our p/n 8183: Please note the areas of weld debris on both sides of the body. Our p/n 8186: Please note that the handle is bent, the owner marks HW, and that the screw shaft appears to be approximately 1/16" off center. Our p/n 8188: Please note the owner marks HW. 1" No. 50 Super JR C-Clamp - Forged Steel - Heat Treated Approximate overall measurements: 2-1/2" x 1-13/16" x 3/8" Total Weight: 0.13 lbs. 1" No. 51 Super JR C-Clamp - Forged Steel - Heat Treated - Circle H Approximate overall measurements: 2-11/16" x 2-3/8" x 7/16" Total Weight: 0.16 lbs. 1-1/4" No. 52 Super JR C-Clamp - Forged Steel - Heat Treated - Circle H Approximate overall measurements: 2-15/16" x 2-1/8" x 7/16" Total Weight: 0.19 lbs. 1-1/4" No. 566 Approximate overall measurements: 3-5/16" x 2-3/16" x 1/2" Total Weight: 0.20 lbs. 2" No. 54 Super JR C-Clamp - Forged Steel - Circle H - Circle W Approximate overall measurements: 4-5/16" x 2-3/8" x 5/8" Total Weight: 0.38 lbs. 2-1/2" No. 568 - Circle H Approximate overall measurements: 5-9/16" x 4" x 5/8" Total Weight: 0.75 lbs. 2-1/2" x 4-1/2" No. 556 Deep Throat - Circle H Approximate overall measurements: 5-3/8" x 6-1/2" x 7/8" Total Weight: 1.20 lbs. 3" No. 55 Super JR C-Clamp - Forged Steel - Circle H - Circle W Approximate overall measurements: 5-3/8" x 2-1/2" x 5/8" Total Weight: 0.53 lbs. 5" No. 540 Standard Clamp - Circle H - Arma Steel Approximate overall measurements: 10-1/8" x 4-3/4" x 1-1/4" Total Weight: 2.35 lbs. 6" No. 44 Hargrave C-Clamp - Forged Steel - Circle H - Circle W Approximate overall measurements: 11" x 5-3/16" x 1-3/8" Total Weight: 3.59 lbs. 6" No. 540 Standard Clamp - Circle H - Arma Steel Approximate overall measurements: 10-7/8" x 5" x 1-1/4" Total Weight: 2.75 lbs. Instructions for combining items from several of our sites to qualify for our $20.00 flat rate shipping fee. To qualify for one flat rate shipping fee when ordering items from our other ebay sites, please add all items from all of our sites to your cart, go to your Shopping Cart, and then click Request Total at the top of the list of items you have selected to purchase. When we receive notice of your request, if all items qualify, we will revise the total shipping charge to $20.00 (you will receive a revised invoice). In the event that there are non-qualifying items, we will revise the invoice accordingly. When you receive the revised invoice, please review the costs, any communication, and complete your order. In the event that any costs are not accurate, please contact us. The following are links to our other sites: SGS-Tools SGS-Antique Tools SGS-Automotive Tools SGS-Bars SGS-Concrete & Masonry Tools SGS-Drywall & Painting Tools SGS-Electrical Trade Tools SGS-Hammers SGS-Pliers & Wrenches SGS-Plumbing Tools SGS-Sheet Metal Tools

Price: 2.5 USD

Location: Warrenton, Oregon

End Time: 2024-08-20T06:19:13.000Z

Shipping Cost: 20 USD