Revere

Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10

Description: Vintage Kyosho (1/10 Super size) R32 Skyline GTR. Will fit vintage GP10 (FW02) and Superten only. (you may need to drill new holes for body posts) This particular body is earlier mould made in the 90's Body is used good condition except the silver paint has blemishes not sure if it's due to age or the body wasn't prepped properly before painting. There are two small cracks at the rear bumper and is taped up with Tamiya aluminum body tape. The kamakzie rear wind is not mounted (held by tapes for pictures) I leave it to the buyer if they want to drill holes in the body and mount it. Total length is approximately 19.5 inches and almost 10 inches at widest area. Wheelbase is about 275mm Front width (measured from middle of the top of wheel fender 235mm Rear width (measured from middle of the top of wheel fender 247mm Please note this body is slightly wider than normal FW03 bodies, falls in the same line as the Kyosho's Ferrari F40, Testarossa, 300ZX, 911 Slantnose and Lambo Diablo. so you will need wide suspension arms which I have it for sale separately as well in my listings, see the last picture, wide suspension arms will tuck the wheels nicely right below the fenders. (It’s mounted on FW03 chassis for your reference. The chassis and wheels/tires are not included it’s for reference only) Flat $25 shipping rate within continental US only. please allow up to 3 days to process. No returns. Please email for questions.

Price: 75 USD

Location: Irvine, California

End Time: 2024-10-23T02:58:36.000Z

Shipping Cost: 25 USD

Product Images

Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10Vintage Kyosho 1/10 Super size R32 Skyline GTR body for GP10 Superten Super10

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Kyosho

Compatible Brand: For Kyosho

Type: Body Shells

Compatible Vehicle Type: Vintage GP10 , SuperTen

Age Level: 17 Years & Up

Compatible Scale: Super Size 1/10

Recommended

Kyosho Mini-z Body TOYOTA CELICA TURBO 4WD No.7 WRC1993 J.Kankkunen MZP481JK
Kyosho Mini-z Body TOYOTA CELICA TURBO 4WD No.7 WRC1993 J.Kankkunen MZP481JK

$40.95

View Details
Unpainted 98mm Kyosho  Cadillac Wagon
Unpainted 98mm Kyosho Cadillac Wagon

$35.00

View Details
Kyosho Fazer Mk2 FZ02 72' Mazda Savanna RX-3 Electric 4WD 1/10 RTR Touring Car w
Kyosho Fazer Mk2 FZ02 72' Mazda Savanna RX-3 Electric 4WD 1/10 RTR Touring Car w

$245.99

View Details
EXO Design 12.9 FH Gold Coating Screw Set For Kyosho 1/10 Optima Mid #OTM016S-G
EXO Design 12.9 FH Gold Coating Screw Set For Kyosho 1/10 Optima Mid #OTM016S-G

$21.99

View Details
Kyosho Dinosauran Velociraptor
Kyosho Dinosauran Velociraptor

$79.55

View Details
Kyosho Javelin With Extras
Kyosho Javelin With Extras

$330.00

View Details
Kyosho XSPEED 56 Sensorless Brushless Motor (5600KV) MZ605
Kyosho XSPEED 56 Sensorless Brushless Motor (5600KV) MZ605

$39.99

View Details
Body RC GP 2WD Racing Kart Birel R31-SE 1:5 Red Replacement Part Kyosho KT-001
Body RC GP 2WD Racing Kart Birel R31-SE 1:5 Red Replacement Part Kyosho KT-001

$21.61

View Details
9290 Factory Works Team Blue Screw Set to fit vtg RC10B2 RC10B3 (B2/B3) *Read*
9290 Factory Works Team Blue Screw Set to fit vtg RC10B2 RC10B3 (B2/B3) *Read*

$21.50

View Details
Kyosho 34432T1 1:10 RC Electric 4WD FAZER Mk2 FZ02L 2021 Toyota Tundra Wide Body
Kyosho 34432T1 1:10 RC Electric 4WD FAZER Mk2 FZ02L 2021 Toyota Tundra Wide Body

$259.99

View Details