Wall mount metal enclosure box for two controllers 12 x 10 x 8"

Description: This controller enclosure measures 12'' x 10'' x 8" (300 x 250 x 200 mm). Two 1/16 DIN sized controllers can be installed with adequate room for wiring and switching device. Uncut front panel option and two pre-cut holes option for 1/16 DIN controller are offered for this box. The box is made of powder coated, 0.040" (1 mm) thick steel. One side of the wall has a pre-cut opening. It can be used for installing cables or a heat sink. The door comes with a lock and key. The hinges of the door are removable. It can be installed on either right or left side. This allows the user put the pre-cut opening either on top or at the bottom without changing the door opening directions. Gasket and plugs are provided. It is rated for IP65 before any holes are cut. The enclosure is designed to be mounted on a wall. You can directly mount it with screws or hang it on the wall with the hangers (included). For high power circuit, wall mount box is preferred because the heavy cords (14 AWG or thicker) are difficult to manage with a table top enclosure. Grounding lugs with M6 thread are located on the inner side of both the front cover and the body of the box. The box has a pre-cut hole on the top for external heatsink (not included). A top cover plate & gasket are included. User can use that plate to cover the top hole on the enclosure.

Price: 84.99 USD

Location: Alpharetta, Georgia

End Time: 2024-11-20T17:46:49.000Z

Shipping Cost: 0 USD