Watt Meter pm10c2s-1c

Description: Item is Used in working condition. No Box or manual. Sold ASIS. PM10C2S1C RF POWER MONITOR PANEL 30 - 960 MHz The Telewave PM10C2S1C is a 1RU, compact RF power monitor panel, capable of monitoring up to ten transmitters and two antennas with optional PM-1A or PM-2A power monitors. This unit fits in 1.75” x 19”, preserving valuable rack space for other equipment. The PM10C2S1C greatly simplifies procedures for monitoring the output of transmitters, and the condition of transmission lines and antennas. Ten remote transmitter keying switches are provided, and a simple two wire hook-up (RF shielded or twisted pair) from the keying circuit of each transmitter to the screw terminals located on the rear of the wattmeter panel completes the connections. A floating ground required by certain transmitters is provided for each keyer. VSWR calculations can be made when appropriate dual-direction power monitors are installed. The FWD / REV switch on the front panel quickly displays forward and reflected power for the transmitter or antenna circuits. Up to 10 power monitors (not included) for the appropriate frequency band(s) are required. The power monitor panel is not frequency dependent, and power monitors for multiple bands can be used with a single panel. No power supply is required for the meter panel. FREQUENCY RANGE BANDWIDTH 30-88 MHz 20 MHz 87.5-108 MHz 20 MHz 118-512 MHz 50 MHz 760-960 MHz 40 MHz The frequency range is determined by the associated power monitors. Bandwidth is the approximate maximum range over which a useful range of voltages are available without retuning. SPECIFICATIONS Power scales FWD 0-400 watts REV 0-120 watts Monitor inputs 12 FWD, 12 REV Input connectors RCA-Female Temperature range -20°C to +60°C Dimensions (HWD) in. (cm) 1.75 x 19 x 5 (4.5 x 48.3 x 12.7) Weight lbs (kg) 2 (0.9)

Price: 250 USD

Location: Morro Bay, California

End Time: 2024-09-09T00:43:26.000Z

Shipping Cost: N/A USD