XADO Revitalizant EX120 for diesel engines

Description: Autumn saleI will ship to any country except Russia and Belarus. Revitalizant EX120 for diesel engines It is intended for protection against operation and repair of diesel engines, including forced and with turbocharging. Due to the 20% higher * concentration of the active substance has an expanded margin for the restoration of the worked surfaces and their protection against operation. * Compared to the XADO product, a revitalizing gel for diesel engines. - Restores and protects from operation of details of the cylinder-piston group, the crank-rod and the gas-distributing mechanism; - Significantly reduces fuel consumption (up to 30% at idle); - Increases to nominal oil pressure in the system; - Smoothes and increases compression in cylinders; - Increases engine power, improves its intake; - Reduces noise and vibration by 10 times; - Increases service life of knots in 2-3 times; - Protects the engine from the negative effects of "cold start"; - Improves engine performance after 50-100 km; - Allows operation of the engine at emergency leakage of oil to 300 km. Forms a metal-ceramic coating on the surfaces of friction pairs (engine parts restore their geometry). As a result, the updated unit is superior to the new in its performance characteristics and is guaranteed to last 2-4 times longer. Application Processing of the engine is carried out in three stages: Stage 1: make the contents of the syringe into the oil filler hole of the engine warmed up to operating temperature. Start the engine and let it idle for 5-10 minutes. 2nd stage: carried out in the same order after 100-250 km. 3rd stage: carried out in the same order after 100-250 km. Processing is considered to be completed after at least 1500 km. Notes - It is not recommended to change the oil before the end - Idling is possible (4 hours - equivalent to 200 km) - New engines with a mileage of up to 20,000 km can be processed in one go - Engines after overhaul are recommended to be processed in the usual way in three stages - Protective metal-ceramic coating is formed on any working mechanism. However, if the mechanism (engine) is in critical condition (100% operation), it is necessary to replace the destroyed parts. The protective coating is active for 60,000 km, after which re-treatment is recommended. Dosage: Volume of the oil system, l. 3-10 11-20 21-30 Number of syringes (8 ml), pcs. 3 6 9 The scheme of processing in stages 1+1+1 2+2+2 3+3+3 Number of syringes for new engines 2 4 6 Features: After processing, your car is under XADO superprotection. During engine operation, the parts of the cylinder-piston group in the area of the upper "dead" point, the gas distribution mechanism (cam, pusher), crankshaft and camshaft sliding bearings are most prone to operation. Revitalizant contains a building material that compensates for the operation of these parts. As a result of revitalization on the surfaces of friction pairs a new multifunctional gradient coating is formed with a set of necessary performance characteristics and stress states. Engine parts are increased in volume, returning the same "hundreds" and "tens" that were lost, worked during operation. This is the effect of repair. The resulting coating has unique properties: high strength, high corrosion resistance, low roughness. After revitalization, engine parts are guaranteed to last 2-4 times longer. As a result of revitalization of the engine the compression in cylinders considerably increases and equalizes, fuel consumption is reduced, intake and rolling of the car increases, oil pumps, units of turbocharging, shafts and inserts (bearings), mirrors of cylinders are restored, ellipseness is eliminated. The engine runs quietly and without vibration. Thanks to revitalization, it can always be maintained in perfect condition. Packaging syringe in a blister of 8 ml, article XA 10034_2

Price: 19.9 USD

Location: Sumy

End Time: 2024-03-04T11:38:04.000Z

Shipping Cost: 10 USD