XL Self Centering Coin Ring Punch Set, 4 Sizes ", 13/16", 7/8", 15/16", 1"

Description: XL Self Centering Punch SetDomed and Threaded Centering Punch Set4 Different Punch SizesNo Spacers NeededBiggest Coin Size 2.125" or 53.9mmWe also sale smaller self centering punches Recommended coin size is between 1.375"(35mm) up to 2.125"(53.9mm) Punch Sizes 13/16" (.812), 7/8" (.875) 15/16" (.936)1" (1.00) This newly designed set, domed and threaded lid highest quality two piece punch body made out of alloy steel and punches and dies are made out heat treated tool steel for maximum durability. This new design makes it much easier to get consistent centered holes in your punched coins. Set includes four different hole punches sizes with updated die design clearance that allows coin punch outs to clear the dies. This is the highest quality coin ring punch set made to last and surpass your expectations. Made in the USA. Instructions on how to use this product: To use the punch, select the punch size you would like to use and it's accompanying die. Insert the die into the bottom half of the main punch body. Set your coin on top of the die as close to the center as possible. Start screwing top half of the punch body down on to the bottom half and once top half is getting close to your coin you will see your coin moving toward center. Next, insert the punch and punch your hole. Make sure your bottom of your punch body sits on flat surface while you are screwing top half on to it. Use a 6 ton hydraulic press or a 2.5 pound brass hammer for this set. Lubing the punch face with a cutting lubricant, such as Pepelube, is recommended. Lubing the inside of the dies is recommended as well.

Price: 199 USD

Location: Lake in the Hills, Illinois

End Time: 2024-02-24T15:05:50.000Z

Shipping Cost: N/A USD