YAMAHA MOTORCYCLE STARTER / HORN BUTTON NEW XS XV XS1100 XS650 XS750 VIRAGO

Description: NOTE: MAY NOT FIT 1973 AT3 125cc!! (with part reference oem#261-88976) models)measure to make sure it will work! mine is 8.5-9mm diameter. OEM reference # 27010-1009 Please measure your button or button hole first to confirm sizing! approx 8.5-9 mm in diameterwith 11mm shoulder on the back to keep itfrom coming out of the front of your control housing. Please read the entire listing, there are simple, as well as DETAILED instructions below, and even some helpful pics above! Get an extra button!!! buy as many as you want, shipping is only .01 cent after the first unit! Fits: Yamaha (Most 70's & 80's) XS XJ XV many Seca, Maxim Virago etc. Please measure your button or button hole first to confirm sizing! fits most 8-9 mm diameter NOTE: DOES NOT FIT AT3 models!! OEM Reference # • 27010-1009 1974 Yamaha TX650 TX650A1975 Yamaha XS650 XS650B1976 Yamaha XS650 XS650C1977 Yamaha XS650 XS650D1978 Yamaha XS650 XS650E1979 Yamaha XS650 XS650F1980 Yamaha XS650 XS650G Special II1981 Yamaha XS650 XS650H Special II1982 Yamaha XS650 XS650J1983 Yamaha XS650 XS650K Also Kawasaki ~ (Most 69-79) NEW replacement YAMAHA starter or horn button, Please measure your button or button hole first to confirm sizing! OEM Reference #• 27010-1009 with spring, brand new in package. 14 day return warranty policy! I'm Fast as H*LL!!!!! check my feedback- It will go out on the same day,- in most cases! For your older yamaha, & it may fit other models! I do warranty the product for 14 days- if returned, buyer will pay the original shipping cost, as well as return shipping costs. --------------------------------------------------------------------------------------------------------- SIMPLE instructions: open the housing remove the philips head restraining screw inside. the tricky part is getting the button and the spring into the holder, and then poking the button out of the housing hole without losing the spring... reinstall the retaining screw note: the small end of the spring goes on the metal nib on the button, see the pic below. ---------------------------------------------------------------------------------------------------------------- DETAILED INSTRUCTIONS: Remove the right hand switch assembly (Figure 1 in above pics.) by unscrewing the two screws that hold the two halves together. Once the two halves are separated twist the throttle and remove the throttle cable. **Next remove the pivot screw on the light switch. Be careful not to drop the spring and washer. (Figure 2.) Sometimes its easier if you remove the wire bracket screw also but it is not necessary. (Figure 2.) Remove the screw the holds the button assembly (Figure 1,) Pull the button assembly out. I used a needle nose pliers to lift out the switch. Disassembly: (Figure 3.) Carefully pry the spring bracket in the direction of the red arrow. Spread it just enough to release the spring plate in the slot and no more. Be careful not to drop the spring. If you look closely you can see that the small end of the spring is on the tab of the button and the large end of the spring rests on the spring plate. The spring plate is soldered to the blue and white wire that carries the ground to the starter solenoid. Remove the old button. Reassembly: Install the new aluminum button into the spring bracket. Install the spring small end toward the button and large end toward the spring plate. Now squeeze the spring bracket in the direction of the blue arrow ever so slightly. Now push the spring plate toward the spring and into the slot on the spring bracket. If you squeezed the spring bracket correctly the spring plate will snap into place. A pair of needle nose pliers can help here. Now simply reinstall the button assembly into the switch assembly and reinstall the light switch if you have one on your bike. Reinstall the throttle cable and the two screws with cable bracket. ----------------------------------------------- ACTUAL EBAY FEEDBACK: Fantastic seller..item was "Exactly as described"..i can't believe how fast it was delivered to me in Ontario....Thanks👍YAMAHA MOTORCYCLE STARTER / HORN BUTTON NEW XS XV XS1100 XS650 XS750 VIRAGO Buyer: bigsmiles77 (5) Excellent excellent A+ A+ A+Buyer: Member id ferr_lawr YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, XS400 Very staisfied. Arrived before expected. Great Seller. Buyer: Member id sjmmcd YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, XS400 Excellent product very happy would recommend thanks Buyer: Member id nick1390_0 YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, XS400 100% good, got it quick thanks! YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, XS400 all good thanks Buyer: Member id kymmargot YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, As described! YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, XS400 Looks good YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850, XS400 Shipped promptly. Buyer: Member id charleseisa517 YAMAHA STARTER / HORN BUTTON NEW XS, XV , XS1100, XS650, XS750, XS850,

Price: 28.99 USD

Location: Northridge, California

End Time: 2024-09-07T18:00:31.000Z

Shipping Cost: 6.01 USD