Zeitronix Zt-3 Wideband Oxygen Sensor Kit CAN Bus 4.9 AFR & ZR-3 Gauge LED

Description: Included in this Zt-3 Kit:Zt-3 Wideband CAN Bus Air Fuel Ratio Meter and Datalogging SystemZR-3 Air/Fuel Gauge: Black Bezel / Blue DigitsBosch 5 wire Wideband Oxygen Sensor, Lambda LSU 4.9 seriesOxygen Sensor Harness (10 feet length)Signal HarnessSerial datalogging cable with RJ-12 to DB-9 converting plug (your laptop must have a serial port or a USB to serial port adapter, not included)InstructionsDisplay is not included, displays are available separatelyMade in the USA! The Zeitronix Wideband Air/Fuel ratio meter and datalogging system is a high quality, stand-alone system for use with carbureted and electronic fuel injection engines. The new Zt-3 has the same high quality, high precision air fuel ratio readings as the Zeitronix signature Zt-2 wideband. The Zt-3 supports wideband air fuel ratio and lambda readings, adjustable simulated narrowband output and a new configurable linear wideband output for ease of use with engine management systems and 3rd party gauges. The new Zt-3's dimensions are only 3 by 2 by 1 inches. The case includes slots case for easy zip tie mounting in a tucked away location.The Zt-3 CAN supports CAN Bus communication for easy connection and logging through other CAN Bus devices. User selectable CAN Bus Speed: 1Mbps, 500 Kbps, 250 Kbps, 125 KbpsUser selectable CAN Bus ID: Standard (11 bit) and Extended (29 bit) User selectable CAN Bus address: 0x0000 to 0x7FFF User selectable CAN Bus update rate: 1ms (1000Hz) to 250ms (4 Hz)120 ohm termination - NoneCAN DATA: Data 0, 1 : Lambda 16 bit (Big Endian, Motorola) x 0.001Data 2 : Lambda 8 bit x 0.01Data 3 : AFR 8 bit x0.1Data 7: Lambda sensor status: 0x00 Sensor OK, 0x01 Sensor cold (warm up), 0x02 Sensor too hot, 0x04 Sensor heater circuit open, 0x08 Sensor heater circuit shorted, 0x10 Sensor maxed at rich lambdaCAN Bus Default Settings: CAN Bus ID Standard (11 bit), CAN Bus ID (HEX) 0x005A, CAN Bus Update Rate 10 ms (100 Hz), CAN Bus Speed 500 Kbps Works with a stand alone engine management system, a piggy back fuel control or a carbureted engine. Finally you can tune for more power, closer to the edge, precisely monitoring Air/Fuel ratio and datalogging up to 9 hours of data with a blazing rate of 70 samples per seconds per graph. Very simple installation - connect two wires to +12V and ground and place the O2 sensor in the exhaust stream and you are ready to read AFR! A simple LED indicator displays off, warm-up and running modes. IMPORTANT: Warranty does not cover oxygen sensor, as these are wear items. Each oxygen sensor is tested to be fully functional by Zeitronix before shipping. Zt-3 Specs: 0.1 AFR accuracyOperating voltage 10V to 18VSwitching power supply for oxygen sensor heaterPrecise sensor temperature controlReverse polarity protectionIntegrated self resettable fusePositive lock connectorsProtected inputs and outputsFlexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connectorAdjustable Narrowband Switching PointConfigurable Wideband Analog OutputInputs/Outputs: Bosch Wideband O2 sensor InputSimulated and adjustable Narrowband Output to feed a stock ECULinear Wideband Output (configurable with a default setup of AFR = Volts * 2 + 9.6)Serial data output for real time datalogging (laptop or Zeitronix black box required, not included)IMPORTANT: Your laptop must have a serial port or a USB to serial port adapter, not included)ZDL Datalogging Software: The Zt-3 communicates with the PC Laptop via the serial port. The ZDL logging software records up to 9 hours of data per single file. Different screen options are available. It has a black background for easy night tuning. The logging start, stop and pause accessible from keyboard shortcuts. Excel and text data export. Win98/NT/2000/ME/XP/Vista/Windows 7 compatible. You do not need P4, P3 or even P2 laptop. Zeitronix understands that you want to leave your new laptop at home and dedicate your old laptop to car tuning. If your laptop is capable of running Win95 and up it is good enough for the Zeitronix logging software. ZR-3 Air / Fuel Gauge Specs:Blue digital AFR readout with large 0.4" (10mm) digitsSlim 0.75" (19mm) design for flexible 52mm pod or surface mounting optionsThe ZR-3 Gauge plugs into the Zt-3/Zt-2 DATA port. Power and serial data is supplied directly through the single connection - there are no additional +12V or ground wires. The ZR-3 cable length is 5 ft. The ZR-3 AFR gauge is only 3/4" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The ZR-2 base allows the gauge to be mounted in a standard 2” 1/16 (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts (4-40 screw size) ZR-3 Gauge Dimensions: Base diameter 2" 1/16 (52mm) Bezel diameter 2" 1/2 (62mm) Thickness 0.75" (19mm) Digit height 0.3" (7.5mm)Click here to shop my store!Purchase details: eCheck payments wait to ship until the eCheck clears, per PayPal instructionsSales tax is collected for most states, please review your total purchase amount before committing to buyInternational buyers pay import duties / customs feesMy name is Chris and I sell on eBay using the golden rule: treat others as I'd want to be treated (and it's worked so far: 100% positive since 1999 on eBay). I'm happy to answer any questions. I want each transaction to go smoothly!

Price: 269.99 USD

Location: Canton, Georgia

End Time: 2025-01-20T19:51:30.000Z

Shipping Cost: N/A USD